71102-TVA-F10 Front Right Fog Light Bezel for HONDA Accord 2022

71102-TVA-F10 Front Right Fog Light Bezel Product Overview

This listing covers 71102-TVA-F10, a front right fog light bezel associated with HONDA Accord 2022. Check the right orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Accord

When comparing 71102-TVA-F10 with the removed bezel, check the nearby lamp opening, confirm the bumper position, and review facelift styling. Before final installation, match the outer contour, check the vehicle build date, and compare the original grille section.

For the listed 2022 application, review the bezel orientation, compare the full OE marking, and check the nearby lamp opening. During receiving inspection, confirm the surface finish, confirm the model year, and confirm the bumper position.

Before the removed bezel is discarded, inspect the lamp aperture size, match the locating-slot layout, and review the bezel orientation. Before the quotation is confirmed, match the outer contour, check the nearby lamp opening, and verify the mounting side.

Front Right Fog Light Bezel Design and Replacement Notes

Before confirming this fog light bezel, check the bumper transition, review narrow bezel ends, and measure the original length. For a repeat wholesale order, review nearby cover openings, review the outer-edge shape, and inspect the moulded face.

For HONDA Accord 2022, measure the original length, compare the centre alignment, and compare mounting-hole height. While reviewing the supplied photographs, compare the surface texture, compare vent or grille openings, and compare transferred hardware.

When preparing a Accord bumper repair, review the outer-edge shape, inspect the frame width, and compare mounting-hole height. Before final installation, review nearby cover openings, check the lamp interface, and inspect the back-side structure.

Application-Specific Identification Notes

A trim-level comparison requires with 71102-TVA-F10 on the Accord 2022: check adjacent bumper parts. The HD02008-018 sample for the right side should compare mounting-hole height. For HONDA identification, 71102-TVA-F10 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-018 should check the ordered mounting side for the HONDA Accord 2022 order.

For application-specific sourcing with 71102-TVA-F10 on the Accord 2022: match the stated trim level. The HD02008-018 sample for the right side should inspect the moulded face. For HONDA identification, 71102-TVA-F10 also requires technicians to inspect each screw point. A buyer quoting HD02008-018 should confirm the required finish for the HONDA Accord 2022 order.

A vehicle-side comparison starts with 71102-TVA-F10 on the Accord 2022: review market-version differences. The HD02008-018 sample for the right side should compare vent or grille openings. For HONDA identification, 71102-TVA-F10 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-018 should support the bezel during transit for the HONDA Accord 2022 order.

Before workshop installation with 71102-TVA-F10 on the Accord 2022: confirm the vehicle market. The HD02008-018 sample for the right side should inspect the back-side structure. For HONDA identification, 71102-TVA-F10 also requires technicians to retain the removed bezel for comparison. A buyer quoting HD02008-018 should send photographs of the removed part for the HONDA Accord 2022 order.

Installation Guidance

When comparing 71102-TVA-F10 with the removed bezel, confirm an evenly seated fit, align the lamp opening first, and confirm the fitting direction. When checking the bumper opening, clean the bumper mounting area, avoid bending moulded tabs, and review the completed alignment.

For the listed 2022 application, support the bumper cover evenly, confirm the finished bumper gap, and confirm an evenly seated fit. At the workshop preparation stage, protect exposed panel edges, check lamp-to-bezel clearance, and confirm every locator engages.

Before the removed bezel is discarded, check adjacent panel gaps, retain the removed bezel for comparison, and confirm the fitting direction. For a repeat wholesale order, check the final perimeter, inspect the surrounding guides, and clean the bumper mounting area.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this fog light bezel, request supported carton packing, state the required quantity, and request export quotation terms. Before clips or hardware are transferred, review carton edge protection, support the bezel during transit, and send photographs of the removed part.

For HONDA Accord 2022, state the target vehicle, review carton edge protection, and confirm separate clip requirements. During the physical comparison, compare the supplied photographs, check the ordered mounting side, and state annual purchasing volume.

When preparing a Accord bumper repair, request export quotation terms, confirm the required finish, and confirm separate clip requirements. When checking the bumper opening, state the required quantity, retain the product label, and confirm the packing method.

Frequently Asked Questions

How should 71102-TVA-F10 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Accord, review facelift styling, check the adjoining gap, verify the lamp remains centred, and retain the product label before installation or quotation.

What vehicle application is listed for 71102-TVA-F10?

71102-TVA-F10 is presented for HONDA Accord 2022. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Accord, review market-version differences, inspect the end geometry, review separate hardware needs, and include the complete OE reference before installation or quotation.

Can photographs alone confirm 71102-TVA-F10 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Accord, compare the installation direction, compare vent or grille openings, avoid bending moulded tabs, and state the destination port before installation or quotation.

Does trim specification matter for 71102-TVA-F10?

Yes. high-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Accord, check the vehicle build date, check the lamp interface, trial-fit the bezel without force, and confirm separate clip requirements before installation or quotation.

How should 71102-TVA-F10 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Accord, inspect the removed bezel, inspect reinforcement ribs, inspect the surrounding guides, and support the bezel during transit before installation or quotation.

Request a Quote

Send the complete OE reference 71102-TVA-F10, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.