71108-TBX-H00 Front Left Fog Light Bracket for HONDA Inspire 2019

71108-TBX-H00 Front Left Fog Light Bracket Product Overview

This product page presents 71108-TBX-H00 for buyers comparing a front left fog light bracket for HONDA Inspire 2019. Check the left orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Inspire

For wholesale selection of 71108-TBX-H00, check adjacent bumper parts, match the locating-slot layout, and compare the installation direction. Before final installation, confirm the vehicle market, inspect the lamp aperture size, and compare the full OE marking.

Before sourcing this front left fog light bracket, confirm the model year, confirm the bumper position, and check adjacent bumper parts. During receiving inspection, match the stated trim level, review facelift styling, and match the locating-slot layout.

Before confirming this fog light bezel, check the nearby lamp opening, verify the mounting side, and confirm the model year. Before the quotation is confirmed, confirm the vehicle market, check adjacent bumper parts, and compare the original grille section.

Front Left Fog Light Bracket Design and Replacement Notes

For replacement in the left front area, inspect the end geometry, compare the surface texture, and check the adjoining gap. For a repeat wholesale order, inspect the back-side structure, compare mounting-hole height, and confirm decorative finish details.

When separating nearby Inspire variants, check the adjoining gap, review locator direction, and check the lamp interface. While reviewing the supplied photographs, review fastening slots, review the outer-edge shape, and review narrow bezel ends.

When comparing 71108-TBX-H00 with the removed bezel, compare mounting-hole height, review nearby cover openings, and check the lamp interface. Before final installation, inspect the back-side structure, measure the original length, and compare transferred hardware.

Application-Specific Identification Notes

A vehicle-side comparison starts with 71108-TBX-H00 on the Inspire 2019: check adjacent bumper parts. The HD02008-023 sample for the left side should compare mounting-hole height. For HONDA identification, 71108-TBX-H00 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-023 should check the ordered mounting side for the HONDA Inspire 2019 order.

For application-specific sourcing with 71108-TBX-H00 on the Inspire 2019: match the stated trim level. The HD02008-023 sample for the left side should inspect the moulded face. For HONDA identification, 71108-TBX-H00 also requires technicians to inspect each screw point. A buyer quoting HD02008-023 should confirm the required finish for the HONDA Inspire 2019 order.

A trim-level comparison requires with 71108-TBX-H00 on the Inspire 2019: review market-version differences. The HD02008-023 sample for the left side should compare vent or grille openings. For HONDA identification, 71108-TBX-H00 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-023 should support the bezel during transit for the HONDA Inspire 2019 order.

Before workshop installation with 71108-TBX-H00 on the Inspire 2019: confirm the vehicle market. The HD02008-023 sample for the left side should inspect the back-side structure. For HONDA identification, 71108-TBX-H00 also requires technicians to retain the removed bezel for comparison. A buyer quoting HD02008-023 should send photographs of the removed part for the HONDA Inspire 2019 order.

Installation Guidance

For wholesale selection of 71108-TBX-H00, review separate hardware needs, protect nearby painted surfaces, and check lamp-to-bezel clearance. When checking the bumper opening, confirm the finished bumper gap, check adjacent panel gaps, and check the final perimeter.

Before sourcing this front left fog light bracket, verify the lamp remains centred, review the completed alignment, and review separate hardware needs. At the workshop preparation stage, inspect each screw point, avoid bending moulded tabs, and transfer reusable clips carefully.

Before confirming this fog light bezel, inspect damaged mounting points, confirm every locator engages, and check lamp-to-bezel clearance. For a repeat wholesale order, protect exposed panel edges, confirm an evenly seated fit, and confirm the finished bumper gap.

Product Technical Specifications

Wholesale Supply and Packing

For replacement in the left front area, include the complete OE reference, confirm the delivery schedule, and check the ordered mounting side. Before clips or hardware are transferred, confirm sample requirements, request supported carton packing, and state the required quantity.

When separating nearby Inspire variants, retain the product label, confirm sample requirements, and state the target vehicle. During the physical comparison, review carton edge protection, confirm separate clip requirements, and compare the supplied photographs.

When comparing 71108-TBX-H00 with the removed bezel, check the ordered mounting side, send photographs of the removed part, and state the target vehicle. When checking the bumper opening, confirm the delivery schedule, support the bezel during transit, and state annual purchasing volume.

Frequently Asked Questions

Are mounting clips supplied with 71108-TBX-H00?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Inspire, review facelift styling, check the adjoining gap, verify the lamp remains centred, and retain the product label before installation or quotation.

Does 71108-TBX-H00 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bracket. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Inspire, review market-version differences, inspect the end geometry, review separate hardware needs, and include the complete OE reference before installation or quotation.

How should 71108-TBX-H00 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Inspire, compare the installation direction, compare vent or grille openings, avoid bending moulded tabs, and state the destination port before installation or quotation.

What vehicle application is listed for 71108-TBX-H00?

71108-TBX-H00 is presented for HONDA Inspire 2019. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Inspire, check the vehicle build date, check the lamp interface, trial-fit the bezel without force, and confirm separate clip requirements before installation or quotation.

Can photographs alone confirm 71108-TBX-H00 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Inspire, inspect the removed bezel, inspect reinforcement ribs, inspect the surrounding guides, and support the bezel during transit before installation or quotation.

Request a Quote

Send the complete OE reference 71108-TBX-H00, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.