V52030001 Blower Motor for HYUNDAI
Primary OE reference: V52030001
Cross-reference 1: 979452B000
Cross-reference 2: 9712102000
Cross-reference 3: A52030001
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI
Brand: HYUNDAI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
V52030001 Automotive Blower Motor Overview
This product entry documents the V52030001 blower unit with practical identification and V52030001 installation checkpoints.
For catalogue item 6202-064, Stable wheel rotation helps distribute air without relying on vehicle speed, making the V52030001 blower important at idle and in traffic. Use 6202-064 when comparing this V52030001 airflow configuration.
OE Reference and Application
The primary catalogue number is V52030001. The recorded application is HYUNDAI. For 6202-064, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6202-064 with the approved OE reference.
HVAC Interface and V52030001 installation
During work on 6202-064, After V52030001 installation, operate low through high speed and confirm V52030001 airflow reaches the selected vents without abnormal vibration. Recheck 6202-064 before the lower trim is closed.
For item 6202-064, confirm that the V52030001 centrifugal wheel clears its housing and that the 6202-064 connector lock engages without force. After seating 6202-064, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-064.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | V52030001 |
| Cross-reference numbers | 979452B000 / 9712102000 / A52030001 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| V52030001 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-064, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6202-064 record remains the picking reference.
For trade item 6202-064, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6202-064 on the packing instruction.
Frequently Asked Questions
How should item 6202-064 and blower number V52030001 be verified?
Match 6202-064 to the complete V52030001 marking, then compare the 6202-064 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-064 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-064; confirm steering position, climate-control specification and the original 6202-064 geometry before approval.
What circuit checks are useful when 6202-064 does not operate?
For 6202-064, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-064 motor again.
Which details should accompany a wholesale request for 6202-064?
Provide item 6202-064, OE V52030001, the stated application, quantity and destination; add 6202-064 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-064?
Clear debris from the air inlet, check that the 6202-064 wheel turns freely, seat the 6202-064 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-064: Send V52030001, the 6202-064 application and required quantity for a fitment and supply review.
