UR83-61-B10 Blower Motor for MAZDA BT-50
Primary OE reference: UR83-61-B10
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA BT-50
Brand: MAZDA
Model: BT-50
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
UR83-61-B10 Automotive Blower Motor Overview
This listing links UR83-61-B10 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6206-005, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-005 when comparing this UR83-61-B10 airflow configuration.
OE Reference and Application
The primary catalogue number is UR83-61-B10. The recorded application is MAZDA BT-50. For 6206-005, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-005 with the approved OE reference.
HVAC Interface and UR83-61-B10 installation
During work on 6206-005, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after UR83-61-B10 installation. Recheck 6206-005 before the lower trim is closed.
For item 6206-005, confirm that the UR83-61-B10 centrifugal wheel clears its housing and that the 6206-005 connector lock engages without force. After seating 6206-005, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-005.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | UR83-61-B10 |
| Cross-reference numbers | UR83-61-B10 |
| Vehicle brand | MAZDA |
| Vehicle model | BT-50 |
| Model year | Confirm by OE reference |
| UR83-61-B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-005, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-005 record remains the picking reference.
For trade item 6206-005, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6206-005 on the packing instruction.
Frequently Asked Questions
How should item 6206-005 and blower number UR83-61-B10 be verified?
Match 6206-005 to the complete UR83-61-B10 marking, then compare the 6206-005 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-005 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-005; confirm steering position, climate-control specification and the original 6206-005 geometry before approval.
What circuit checks are useful when 6206-005 does not operate?
For 6206-005, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-005 motor again.
Which details should accompany a wholesale request for 6206-005?
Provide item 6206-005, OE UR83-61-B10, the stated application, quantity and destination; add 6206-005 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-005?
Clear debris from the air inlet, check that the 6206-005 wheel turns freely, seat the 6206-005 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-005: Send UR83-61-B10, the 6206-005 application and required quantity for a fitment and supply review.
