TD11-61-P80 Blower Motor for MAZDA CX-9
Primary OE reference: TD11-61-P80
Cross-reference 1: R00348910
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA CX-9
Brand: MAZDA
Model: CX-9
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
TD11-61-P80 Automotive Blower Motor Overview
This product entry documents the TD11-61-P80 blower unit with practical identification and TD11-61-P80 installation checkpoints.
For catalogue item 6206-018, Stable wheel rotation helps distribute air without relying on vehicle speed, making the TD11-61-P80 blower important at idle and in traffic. Use 6206-018 when comparing this TD11-61-P80 airflow configuration.
OE Reference and Application
The primary catalogue number is TD11-61-P80. The recorded application is MAZDA CX-9. For 6206-018, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6206-018 with the approved OE reference.
HVAC Interface and TD11-61-P80 installation
During work on 6206-018, After TD11-61-P80 installation, operate low through high speed and confirm TD11-61-P80 airflow reaches the selected vents without abnormal vibration. Recheck 6206-018 before the lower trim is closed.
For item 6206-018, confirm that the TD11-61-P80 centrifugal wheel clears its housing and that the 6206-018 connector lock engages without force. After seating 6206-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | TD11-61-P80 |
| Cross-reference numbers | R00348910 |
| Vehicle brand | MAZDA |
| Vehicle model | CX-9 |
| Model year | Confirm by OE reference |
| TD11-61-P80 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-018, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-018 record remains the picking reference.
For trade item 6206-018, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6206-018 on the packing instruction.
Frequently Asked Questions
How should item 6206-018 and blower number TD11-61-P80 be verified?
Match 6206-018 to the complete TD11-61-P80 marking, then compare the 6206-018 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-018 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-018; confirm steering position, climate-control specification and the original 6206-018 geometry before approval.
What circuit checks are useful when 6206-018 does not operate?
For 6206-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-018 motor again.
Which details should accompany a wholesale request for 6206-018?
Provide item 6206-018, OE TD11-61-P80, the stated application, quantity and destination; add 6206-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-018?
Clear debris from the air inlet, check that the 6206-018 wheel turns freely, seat the 6206-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-018: Send TD11-61-P80, the 6206-018 application and required quantity for a fitment and supply review.
