T1017972J Blower Motor for NISSAN
Primary OE reference: T1017972J
Cross-reference 1: 272203YF0A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
T1017972J Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use T1017972J together with the T1017972J product images and vehicle data on this page.
For catalogue item 6205-102, the T1017972J blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-102 when comparing this T1017972J airflow configuration.
OE Reference and Application
The primary catalogue number is T1017972J. The recorded application is NISSAN. For 6205-102, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-102 with the approved OE reference.
HVAC Interface and T1017972J installation
During work on 6205-102, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-102 before the lower trim is closed.
For item 6205-102, confirm that the T1017972J centrifugal wheel clears its housing and that the 6205-102 connector lock engages without force. After seating 6205-102, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-102.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | T1017972J |
| Cross-reference numbers | 272203YF0A |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| T1017972J installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-102, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6205-102 record remains the picking reference.
For trade item 6205-102, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6205-102 on the packing instruction.
Frequently Asked Questions
How should item 6205-102 and blower number T1017972J be verified?
Match 6205-102 to the complete T1017972J marking, then compare the 6205-102 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-102 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-102; confirm steering position, climate-control specification and the original 6205-102 geometry before approval.
What circuit checks are useful when 6205-102 does not operate?
For 6205-102, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-102 motor again.
Which details should accompany a wholesale request for 6205-102?
Provide item 6205-102, OE T1017972J, the stated application, quantity and destination; add 6205-102 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-102?
Clear debris from the air inlet, check that the 6205-102 wheel turns freely, seat the 6205-102 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-102: Send T1017972J, the 6205-102 application and required quantity for a fitment and supply review.
