STC3153 Blower Motor for LAND ROVER
Primary OE reference: STC3153
Cross-reference 1: 3129588
Cross-reference 2: 1940005091
Cross-reference 3: BTR6485
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LAND ROVER
Brand: LAND ROVER
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
STC3153 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use STC3153 together with the STC3153 product images and vehicle data on this page.
For catalogue item 6238-012, the STC3153 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6238-012 when comparing this STC3153 airflow configuration.
OE Reference and Application
The primary catalogue number is STC3153. The recorded application is LAND ROVER. For 6238-012, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6238-012 with the approved OE reference.
HVAC Interface and STC3153 installation
During work on 6238-012, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6238-012 before the lower trim is closed.
For item 6238-012, confirm that the STC3153 centrifugal wheel clears its housing and that the 6238-012 connector lock engages without force. After seating 6238-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6238-012.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | STC3153 |
| Cross-reference numbers | 3129588 / 1940005091 / BTR6485 |
| Vehicle brand | LAND ROVER |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| STC3153 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6238-012, Packing preparation accounts for the STC3153 motor weight and wheel shape to reduce movement inside the carton. The 6238-012 record remains the picking reference.
For trade item 6238-012, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6238-012 on the packing instruction.
Frequently Asked Questions
How should item 6238-012 and blower number STC3153 be verified?
Match 6238-012 to the complete STC3153 marking, then compare the 6238-012 plug, terminal count, mounting flange and wheel dimensions with the removed LAND ROVER unit.
Can 6238-012 have more than one vehicle-side blower configuration?
Yes. LAND ROVER production changes can affect 6238-012; confirm steering position, climate-control specification and the original 6238-012 geometry before approval.
What circuit checks are useful when 6238-012 does not operate?
For 6238-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6238-012 motor again.
Which details should accompany a wholesale request for 6238-012?
Provide item 6238-012, OE STC3153, the stated application, quantity and destination; add 6238-012 carton or private-label requirements separately.
How can noise be avoided after fitting 6238-012?
Clear debris from the air inlet, check that the 6238-012 wheel turns freely, seat the 6238-012 flange evenly and keep wiring away from the impeller.
Request a quote for 6238-012: Send STC3153, the 6238-012 application and required quantity for a fitment and supply review.
