PM3344 Blower Motor for FORD
Primary OE reference: PM3344
Cross-reference 1: 35009
Cross-reference 2: 18504AA
Cross-reference 3: 3010008
Cross-reference 4: 3126113
Cross-reference 5: 44-1130
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM3344 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference PM3344 for application-led sourcing.
For catalogue item 6217-062, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6217-062 when comparing this PM3344 airflow configuration.
OE Reference and Application
The primary catalogue number is PM3344. The recorded application is FORD. For 6217-062, Measure the PM3344 wheel height and outer diameter, then compare the electrical socket and base contour with the PM3344 product photos. Record 6217-062 with the approved OE reference.
HVAC Interface and PM3344 installation
During work on 6217-062, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after PM3344 installation. Recheck 6217-062 before the lower trim is closed.
For item 6217-062, confirm that the PM3344 centrifugal wheel clears its housing and that the 6217-062 connector lock engages without force. After seating 6217-062, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6217-062.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM3344 |
| Cross-reference numbers | 35009 / 18504AA / 3010008 / 3126113 / 44-1130 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| PM3344 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6217-062, Packing preparation accounts for the PM3344 motor weight and wheel shape to reduce movement inside the carton. The 6217-062 record remains the picking reference.
For trade item 6217-062, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6217-062 on the packing instruction.
Frequently Asked Questions
How should item 6217-062 and blower number PM3344 be verified?
Match 6217-062 to the complete PM3344 marking, then compare the 6217-062 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6217-062 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6217-062; confirm steering position, climate-control specification and the original 6217-062 geometry before approval.
What circuit checks are useful when 6217-062 does not operate?
For 6217-062, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6217-062 motor again.
Which details should accompany a wholesale request for 6217-062?
Provide item 6217-062, OE PM3344, the stated application, quantity and destination; add 6217-062 carton or private-label requirements separately.
How can noise be avoided after fitting 6217-062?
Clear debris from the air inlet, check that the 6217-062 wheel turns freely, seat the 6217-062 flange evenly and keep wiring away from the impeller.
Request a quote for 6217-062: Send PM3344, the 6217-062 application and required quantity for a fitment and supply review.
