PM292 Blower Motor for FORD F-250 Super Duty
Primary OE reference: PM292
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD F-250 Super Duty
Brand: FORD
Model: F-250 Super Duty
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM292 Automotive Blower Motor Overview
Reference PM292 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6203-094, the PM292 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-094 when comparing this PM292 airflow configuration.
OE Reference and Application
The primary catalogue number is PM292. The recorded application is FORD F-250 Super Duty. For 6203-094, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6203-094 with the approved OE reference.
HVAC Interface and PM292 installation
During work on 6203-094, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-094 before the lower trim is closed.
For item 6203-094, confirm that the PM292 centrifugal wheel clears its housing and that the 6203-094 connector lock engages without force. After seating 6203-094, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-094.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM292 |
| Cross-reference numbers | PM292 |
| Vehicle brand | FORD |
| Vehicle model | F-250 Super Duty |
| Model year | Confirm by OE reference |
| PM292 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-094, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-094 record remains the picking reference.
For trade item 6203-094, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-094 on the packing instruction.
Frequently Asked Questions
How should item 6203-094 and blower number PM292 be verified?
Match 6203-094 to the complete PM292 marking, then compare the 6203-094 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-094 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-094; confirm steering position, climate-control specification and the original 6203-094 geometry before approval.
What circuit checks are useful when 6203-094 does not operate?
For 6203-094, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-094 motor again.
Which details should accompany a wholesale request for 6203-094?
Provide item 6203-094, OE PM292, the stated application, quantity and destination; add 6203-094 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-094?
Clear debris from the air inlet, check that the 6203-094 wheel turns freely, seat the 6203-094 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-094: Send PM292, the 6203-094 application and required quantity for a fitment and supply review.
