PM285 Blower Motor for FORD Ranger
Primary OE reference: PM285
Cross-reference 1: 35498
Cross-reference 2: TYC700212
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Ranger
Brand: FORD
Model: Ranger
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM285 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use PM285 together with the PM285 product images and vehicle data on this page.
For catalogue item 6203-092, the PM285 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-092 when comparing this PM285 airflow configuration.
OE Reference and Application
The primary catalogue number is PM285. The recorded application is FORD Ranger. For 6203-092, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6203-092 with the approved OE reference.
HVAC Interface and PM285 installation
During work on 6203-092, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-092 before the lower trim is closed.
For item 6203-092, confirm that the PM285 centrifugal wheel clears its housing and that the 6203-092 connector lock engages without force. After seating 6203-092, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-092.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM285 |
| Cross-reference numbers | 35498 / TYC700212 |
| Vehicle brand | FORD |
| Vehicle model | Ranger |
| Model year | Confirm by OE reference |
| PM285 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-092, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6203-092 record remains the picking reference.
For trade item 6203-092, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6203-092 on the packing instruction.
Frequently Asked Questions
How should item 6203-092 and blower number PM285 be verified?
Match 6203-092 to the complete PM285 marking, then compare the 6203-092 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-092 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-092; confirm steering position, climate-control specification and the original 6203-092 geometry before approval.
What circuit checks are useful when 6203-092 does not operate?
For 6203-092, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-092 motor again.
Which details should accompany a wholesale request for 6203-092?
Provide item 6203-092, OE PM285, the stated application, quantity and destination; add 6203-092 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-092?
Clear debris from the air inlet, check that the 6203-092 wheel turns freely, seat the 6203-092 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-092: Send PM285, the 6203-092 application and required quantity for a fitment and supply review.
