PM2713 Blower Motor for NISSAN Frontier
Primary OE reference: PM2713
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Frontier
Brand: NISSAN
Model: Frontier
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM2713 Automotive Blower Motor Overview
The PM2713 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-062, When the climate-control circuit commands PM2713 airflow, the electric motor rotates the PM2713 fan wheel inside the HVAC housing. Use 6205-062 when comparing this PM2713 airflow configuration.
OE Reference and Application
The primary catalogue number is PM2713. The recorded application is NISSAN Frontier. For 6205-062, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-062 with the approved OE reference.
HVAC Interface and PM2713 installation
During work on 6205-062, If PM2713 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the PM2713 motor is the only cause. Recheck 6205-062 before the lower trim is closed.
For item 6205-062, confirm that the PM2713 centrifugal wheel clears its housing and that the 6205-062 connector lock engages without force. After seating 6205-062, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-062.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM2713 |
| Cross-reference numbers | PM2713 |
| Vehicle brand | NISSAN |
| Vehicle model | Frontier |
| Model year | Confirm by OE reference |
| PM2713 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-062, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-062 record remains the picking reference.
For trade item 6205-062, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-062 on the packing instruction.
Frequently Asked Questions
How should item 6205-062 and blower number PM2713 be verified?
Match 6205-062 to the complete PM2713 marking, then compare the 6205-062 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-062 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-062; confirm steering position, climate-control specification and the original 6205-062 geometry before approval.
What circuit checks are useful when 6205-062 does not operate?
For 6205-062, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-062 motor again.
Which details should accompany a wholesale request for 6205-062?
Provide item 6205-062, OE PM2713, the stated application, quantity and destination; add 6205-062 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-062?
Clear debris from the air inlet, check that the 6205-062 wheel turns freely, seat the 6205-062 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-062: Send PM2713, the 6205-062 application and required quantity for a fitment and supply review.
