PM267 Blower Motor for FORD E-350 Econoline
Primary OE reference: PM267
Cross-reference 1: 35402
Cross-reference 2: 26-13002
Cross-reference 3: 700087
Cross-reference 4: 1011003
Cross-reference 5: 10109
Cross-reference 6: 2014480
Cross-reference 7: 2311586
Cross-reference 8: 26-13402
Cross-reference 9: 75139
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD E-350 Econoline
Brand: FORD
Model: E-350 Econoline
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM267 Automotive Blower Motor Overview
This product entry documents the PM267 blower unit with practical identification and PM267 installation checkpoints.
For catalogue item 6203-091, Stable wheel rotation helps distribute air without relying on vehicle speed, making the PM267 blower important at idle and in traffic. Use 6203-091 when comparing this PM267 airflow configuration.
OE Reference and Application
The primary catalogue number is PM267. The recorded application is FORD E-350 Econoline. For 6203-091, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6203-091 with the approved OE reference.
HVAC Interface and PM267 installation
During work on 6203-091, After PM267 installation, operate low through high speed and confirm PM267 airflow reaches the selected vents without abnormal vibration. Recheck 6203-091 before the lower trim is closed.
For item 6203-091, confirm that the PM267 centrifugal wheel clears its housing and that the 6203-091 connector lock engages without force. After seating 6203-091, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-091.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM267 |
| Cross-reference numbers | 35402 / 26-13002 / 700087 / 1011003 / 10109 / 2014480 / 2311586 / 26-13402 / 75139 |
| Vehicle brand | FORD |
| Vehicle model | E-350 Econoline |
| Model year | Confirm by OE reference |
| PM267 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-091, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-091 record remains the picking reference.
For trade item 6203-091, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-091 on the packing instruction.
Frequently Asked Questions
How should item 6203-091 and blower number PM267 be verified?
Match 6203-091 to the complete PM267 marking, then compare the 6203-091 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-091 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-091; confirm steering position, climate-control specification and the original 6203-091 geometry before approval.
What circuit checks are useful when 6203-091 does not operate?
For 6203-091, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-091 motor again.
Which details should accompany a wholesale request for 6203-091?
Provide item 6203-091, OE PM267, the stated application, quantity and destination; add 6203-091 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-091?
Clear debris from the air inlet, check that the 6203-091 wheel turns freely, seat the 6203-091 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-091: Send PM267, the 6203-091 application and required quantity for a fitment and supply review.
