PM249 Blower Motor for FORD F-150
Primary OE reference: PM249
Cross-reference 1: 35474
Cross-reference 2: PM249CB
Cross-reference 3: 35475
Cross-reference 4: 334736
Cross-reference 5: 4114049
Cross-reference 6: 3502998
Cross-reference 7: 3744953
Cross-reference 8: 4163760
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD F-150
Brand: FORD
Model: F-150
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM249 Automotive Blower Motor Overview
This listing links PM249 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6203-084, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-084 when comparing this PM249 airflow configuration.
OE Reference and Application
The primary catalogue number is PM249. The recorded application is FORD F-150. For 6203-084, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-084 with the approved OE reference.
HVAC Interface and PM249 installation
During work on 6203-084, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after PM249 installation. Recheck 6203-084 before the lower trim is closed.
For item 6203-084, confirm that the PM249 centrifugal wheel clears its housing and that the 6203-084 connector lock engages without force. After seating 6203-084, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-084.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM249 |
| Cross-reference numbers | 35474 / PM249CB / 35475 / 334736 / 4114049 / 3502998 / 3744953 / 4163760 |
| Vehicle brand | FORD |
| Vehicle model | F-150 |
| Model year | Confirm by OE reference |
| PM249 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-084, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-084 record remains the picking reference.
For trade item 6203-084, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-084 on the packing instruction.
Frequently Asked Questions
How should item 6203-084 and blower number PM249 be verified?
Match 6203-084 to the complete PM249 marking, then compare the 6203-084 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-084 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-084; confirm steering position, climate-control specification and the original 6203-084 geometry before approval.
What circuit checks are useful when 6203-084 does not operate?
For 6203-084, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-084 motor again.
Which details should accompany a wholesale request for 6203-084?
Provide item 6203-084, OE PM249, the stated application, quantity and destination; add 6203-084 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-084?
Clear debris from the air inlet, check that the 6203-084 wheel turns freely, seat the 6203-084 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-084: Send PM249, the 6203-084 application and required quantity for a fitment and supply review.
