PM2004 Blower Motor for FORD Escape
Primary OE reference: PM2004
Cross-reference 1: TYC700031
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Escape
Brand: FORD
Model: Escape
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
PM2004 Automotive Blower Motor Overview
YoonShan catalogues PM2004 as an HVAC PM2004 airflow component for workshops, distributors and export buyers.
For catalogue item 6203-096, When the climate-control circuit commands PM2004 airflow, the electric motor rotates the PM2004 fan wheel inside the HVAC housing. Use 6203-096 when comparing this PM2004 airflow configuration.
OE Reference and Application
The primary catalogue number is PM2004. The recorded application is FORD Escape. For 6203-096, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed FORD unit. Record 6203-096 with the approved OE reference.
HVAC Interface and PM2004 installation
During work on 6203-096, If PM2004 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the PM2004 motor is the only cause. Recheck 6203-096 before the lower trim is closed.
For item 6203-096, confirm that the PM2004 centrifugal wheel clears its housing and that the 6203-096 connector lock engages without force. After seating 6203-096, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-096.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | PM2004 |
| Cross-reference numbers | TYC700031 |
| Vehicle brand | FORD |
| Vehicle model | Escape |
| Model year | Confirm by OE reference |
| PM2004 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-096, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6203-096 record remains the picking reference.
For trade item 6203-096, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6203-096 on the packing instruction.
Frequently Asked Questions
How should item 6203-096 and blower number PM2004 be verified?
Match 6203-096 to the complete PM2004 marking, then compare the 6203-096 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-096 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-096; confirm steering position, climate-control specification and the original 6203-096 geometry before approval.
What circuit checks are useful when 6203-096 does not operate?
For 6203-096, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-096 motor again.
Which details should accompany a wholesale request for 6203-096?
Provide item 6203-096, OE PM2004, the stated application, quantity and destination; add 6203-096 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-096?
Clear debris from the air inlet, check that the 6203-096 wheel turns freely, seat the 6203-096 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-096: Send PM2004, the 6203-096 application and required quantity for a fitment and supply review.
