N24361B10 Blower Motor for MAZDA MX-5
Primary OE reference: N24361B10
Cross-reference 1: 872700-1650
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA MX-5
Brand: MAZDA
Model: MX-5
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
N24361B10 Automotive Blower Motor Overview
Use N24361B10 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.
For catalogue item 6206-041, Cabin N24361B10 airflow depends on the N24361B10 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6206-041 when comparing this N24361B10 airflow configuration.
OE Reference and Application
The primary catalogue number is N24361B10. The recorded application is MAZDA MX-5. For 6206-041, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6206-041 with the approved OE reference.
HVAC Interface and N24361B10 installation
During work on 6206-041, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6206-041 before the lower trim is closed.
For item 6206-041, confirm that the N24361B10 centrifugal wheel clears its housing and that the 6206-041 connector lock engages without force. After seating 6206-041, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-041.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | N24361B10 |
| Cross-reference numbers | 872700-1650 |
| Vehicle brand | MAZDA |
| Vehicle model | MX-5 |
| Model year | Confirm by OE reference |
| N24361B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-041, Packing preparation accounts for the N24361B10 motor weight and wheel shape to reduce movement inside the carton. The 6206-041 record remains the picking reference.
For trade item 6206-041, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6206-041 on the packing instruction.
Frequently Asked Questions
How should item 6206-041 and blower number N24361B10 be verified?
Match 6206-041 to the complete N24361B10 marking, then compare the 6206-041 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-041 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-041; confirm steering position, climate-control specification and the original 6206-041 geometry before approval.
What circuit checks are useful when 6206-041 does not operate?
For 6206-041, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-041 motor again.
Which details should accompany a wholesale request for 6206-041?
Provide item 6206-041, OE N24361B10, the stated application, quantity and destination; add 6206-041 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-041?
Clear debris from the air inlet, check that the 6206-041 wheel turns freely, seat the 6206-041 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-041: Send N24361B10, the 6206-041 application and required quantity for a fitment and supply review.
