MR460945 Blower Motor for MITSUBISHI
Primary OE reference: MR460945
Cross-reference 1: MR996980
Cross-reference 2: 5027251360
Cross-reference 3: 75528
Cross-reference 4: MR958181
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI
Brand: MITSUBISHI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
MR460945 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use MR460945 together with the MR460945 product images and vehicle data on this page.
For catalogue item 6215-049, the MR460945 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6215-049 when comparing this MR460945 airflow configuration.
OE Reference and Application
The primary catalogue number is MR460945. The recorded application is MITSUBISHI. For 6215-049, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6215-049 with the approved OE reference.
HVAC Interface and MR460945 installation
During work on 6215-049, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6215-049 before the lower trim is closed.
For item 6215-049, confirm that the MR460945 centrifugal wheel clears its housing and that the 6215-049 connector lock engages without force. After seating 6215-049, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-049.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | MR460945 |
| Cross-reference numbers | MR996980 / 5027251360 / 75528 / MR958181 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| MR460945 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-049, Packing preparation accounts for the MR460945 motor weight and wheel shape to reduce movement inside the carton. The 6215-049 record remains the picking reference.
For trade item 6215-049, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6215-049 on the packing instruction.
Frequently Asked Questions
How should item 6215-049 and blower number MR460945 be verified?
Match 6215-049 to the complete MR460945 marking, then compare the 6215-049 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-049 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-049; confirm steering position, climate-control specification and the original 6215-049 geometry before approval.
What circuit checks are useful when 6215-049 does not operate?
For 6215-049, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-049 motor again.
Which details should accompany a wholesale request for 6215-049?
Provide item 6215-049, OE MR460945, the stated application, quantity and destination; add 6215-049 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-049?
Clear debris from the air inlet, check that the 6215-049 wheel turns freely, seat the 6215-049 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-049: Send MR460945, the 6215-049 application and required quantity for a fitment and supply review.
