LP60-94 Blower Motor for HYUNDAI
Primary OE reference: LP60-94
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI
Brand: HYUNDAI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
LP60-94 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by LP60-94 to support OE-number comparison before purchase.
For catalogue item 6202-056, Cabin LP60-94 airflow depends on the LP60-94 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6202-056 when comparing this LP60-94 airflow configuration.
OE Reference and Application
The primary catalogue number is LP60-94. The recorded application is HYUNDAI. For 6202-056, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6202-056 with the approved OE reference.
HVAC Interface and LP60-94 installation
During work on 6202-056, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6202-056 before the lower trim is closed.
For item 6202-056, confirm that the LP60-94 centrifugal wheel clears its housing and that the 6202-056 connector lock engages without force. After seating 6202-056, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-056.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | LP60-94 |
| Cross-reference numbers | LP60-94 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| LP60-94 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-056, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6202-056 record remains the picking reference.
For trade item 6202-056, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6202-056 on the packing instruction.
Frequently Asked Questions
How should item 6202-056 and blower number LP60-94 be verified?
Match 6202-056 to the complete LP60-94 marking, then compare the 6202-056 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-056 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-056; confirm steering position, climate-control specification and the original 6202-056 geometry before approval.
What circuit checks are useful when 6202-056 does not operate?
For 6202-056, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-056 motor again.
Which details should accompany a wholesale request for 6202-056?
Provide item 6202-056, OE LP60-94, the stated application, quantity and destination; add 6202-056 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-056?
Clear debris from the air inlet, check that the 6202-056 wheel turns freely, seat the 6202-056 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-056: Send LP60-94, the 6202-056 application and required quantity for a fitment and supply review.
