L31924 Blower Motor for FORD
Primary OE reference: L31924
Cross-reference 1: JX6A19846BC
Cross-reference 2: 87648
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
L31924 Automotive Blower Motor Overview
The L31924 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-119, When the climate-control circuit commands L31924 airflow, the electric motor rotates the L31924 fan wheel inside the HVAC housing. Use 6203-119 when comparing this L31924 airflow configuration.
OE Reference and Application
The primary catalogue number is L31924. The recorded application is FORD. For 6203-119, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-119 with the approved OE reference.
HVAC Interface and L31924 installation
During work on 6203-119, If L31924 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the L31924 motor is the only cause. Recheck 6203-119 before the lower trim is closed.
For item 6203-119, confirm that the L31924 centrifugal wheel clears its housing and that the 6203-119 connector lock engages without force. After seating 6203-119, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-119.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | L31924 |
| Cross-reference numbers | JX6A19846BC / 87648 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| L31924 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-119, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-119 record remains the picking reference.
For trade item 6203-119, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-119 on the packing instruction.
Frequently Asked Questions
How should item 6203-119 and blower number L31924 be verified?
Match 6203-119 to the complete L31924 marking, then compare the 6203-119 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-119 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-119; confirm steering position, climate-control specification and the original 6203-119 geometry before approval.
What circuit checks are useful when 6203-119 does not operate?
For 6203-119, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-119 motor again.
Which details should accompany a wholesale request for 6203-119?
Provide item 6203-119, OE L31924, the stated application, quantity and destination; add 6203-119 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-119?
Clear debris from the air inlet, check that the 6203-119 wheel turns freely, seat the 6203-119 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-119: Send L31924, the 6203-119 application and required quantity for a fitment and supply review.
