L1MH19846CA Blower Motor for FORD Explorer
Primary OE reference: L1MH19846CA
Cross-reference 1: 615-10095
Cross-reference 2: 2312047
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Explorer
Brand: FORD
Model: Explorer
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
L1MH19846CA Automotive Blower Motor Overview
YoonShan catalogues L1MH19846CA as an HVAC L1MH19846CA airflow component for workshops, distributors and export buyers.
For catalogue item 6203-123, When the climate-control circuit commands L1MH19846CA airflow, the electric motor rotates the L1MH19846CA fan wheel inside the HVAC housing. Use 6203-123 when comparing this L1MH19846CA airflow configuration.
OE Reference and Application
The primary catalogue number is L1MH19846CA. The recorded application is FORD Explorer. For 6203-123, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed FORD unit. Record 6203-123 with the approved OE reference.
HVAC Interface and L1MH19846CA installation
During work on 6203-123, If L1MH19846CA airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the L1MH19846CA motor is the only cause. Recheck 6203-123 before the lower trim is closed.
For item 6203-123, confirm that the L1MH19846CA centrifugal wheel clears its housing and that the 6203-123 connector lock engages without force. After seating 6203-123, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-123.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | L1MH19846CA |
| Cross-reference numbers | 615-10095 / 2312047 |
| Vehicle brand | FORD |
| Vehicle model | Explorer |
| Model year | Confirm by OE reference |
| L1MH19846CA installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-123, Packing preparation accounts for the L1MH19846CA motor weight and wheel shape to reduce movement inside the carton. The 6203-123 record remains the picking reference.
For trade item 6203-123, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6203-123 on the packing instruction.
Frequently Asked Questions
How should item 6203-123 and blower number L1MH19846CA be verified?
Match 6203-123 to the complete L1MH19846CA marking, then compare the 6203-123 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-123 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-123; confirm steering position, climate-control specification and the original 6203-123 geometry before approval.
What circuit checks are useful when 6203-123 does not operate?
For 6203-123, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-123 motor again.
Which details should accompany a wholesale request for 6203-123?
Provide item 6203-123, OE L1MH19846CA, the stated application, quantity and destination; add 6203-123 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-123?
Clear debris from the air inlet, check that the 6203-123 wheel turns freely, seat the 6203-123 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-123: Send L1MH19846CA, the 6203-123 application and required quantity for a fitment and supply review.
