JGC500050 Blower Motor for LAND ROVER Range Rover Sport 2006-2013
Primary OE reference: JGC500050
Cross-reference 1: LFH101CC
Cross-reference 2: MF0160700870
Cross-reference 3: 5H2218527BA
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LAND ROVER Range Rover Sport 2006-2013
Brand: LAND ROVER
Model: Range Rover Sport
Vehicle year: 2006-2013
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
JGC500050 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use JGC500050 together with the JGC500050 product images and vehicle data on this page.
For catalogue item 6238-001, the JGC500050 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6238-001 when comparing this JGC500050 airflow configuration.
OE Reference and Application
The primary catalogue number is JGC500050. The recorded application is LAND ROVER Range Rover Sport 2006-2013. For 6238-001, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6238-001 with the approved OE reference.
HVAC Interface and JGC500050 installation
During work on 6238-001, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6238-001 before the lower trim is closed.
For item 6238-001, confirm that the JGC500050 centrifugal wheel clears its housing and that the 6238-001 connector lock engages without force. After seating 6238-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6238-001.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | JGC500050 |
| Cross-reference numbers | LFH101CC / MF0160700870 / 5H2218527BA |
| Vehicle brand | LAND ROVER |
| Vehicle model | Range Rover Sport |
| Model year | 2006-2013 |
| JGC500050 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6238-001, Packing preparation accounts for the JGC500050 motor weight and wheel shape to reduce movement inside the carton. The 6238-001 record remains the picking reference.
For trade item 6238-001, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6238-001 on the packing instruction.
Frequently Asked Questions
How should item 6238-001 and blower number JGC500050 be verified?
Match 6238-001 to the complete JGC500050 marking, then compare the 6238-001 plug, terminal count, mounting flange and wheel dimensions with the removed LAND ROVER unit.
Can 6238-001 have more than one vehicle-side blower configuration?
Yes. LAND ROVER production changes can affect 6238-001; confirm steering position, climate-control specification and the original 6238-001 geometry before approval.
What circuit checks are useful when 6238-001 does not operate?
For 6238-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6238-001 motor again.
Which details should accompany a wholesale request for 6238-001?
Provide item 6238-001, OE JGC500050, the stated application, quantity and destination; add 6238-001 carton or private-label requirements separately.
How can noise be avoided after fitting 6238-001?
Clear debris from the air inlet, check that the 6238-001 wheel turns freely, seat the 6238-001 flange evenly and keep wiring away from the impeller.
Request a quote for 6238-001: Send JGC500050, the 6238-001 application and required quantity for a fitment and supply review.
