JGC500030 Blower Motor for LAND ROVER
Primary OE reference: JGC500030
Cross-reference 1: 715230
Cross-reference 2: AU8230
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LAND ROVER
Brand: LAND ROVER
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
JGC500030 Automotive Blower Motor Overview
This product entry documents the JGC500030 blower unit with practical identification and JGC500030 installation checkpoints.
For catalogue item 6238-014, Stable wheel rotation helps distribute air without relying on vehicle speed, making the JGC500030 blower important at idle and in traffic. Use 6238-014 when comparing this JGC500030 airflow configuration.
OE Reference and Application
The primary catalogue number is JGC500030. The recorded application is LAND ROVER. For 6238-014, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6238-014 with the approved OE reference.
HVAC Interface and JGC500030 installation
During work on 6238-014, After JGC500030 installation, operate low through high speed and confirm JGC500030 airflow reaches the selected vents without abnormal vibration. Recheck 6238-014 before the lower trim is closed.
For item 6238-014, confirm that the JGC500030 centrifugal wheel clears its housing and that the 6238-014 connector lock engages without force. After seating 6238-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6238-014.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | JGC500030 |
| Cross-reference numbers | 715230 / AU8230 |
| Vehicle brand | LAND ROVER |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| JGC500030 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6238-014, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6238-014 record remains the picking reference.
For trade item 6238-014, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6238-014 on the packing instruction.
Frequently Asked Questions
How should item 6238-014 and blower number JGC500030 be verified?
Match 6238-014 to the complete JGC500030 marking, then compare the 6238-014 plug, terminal count, mounting flange and wheel dimensions with the removed LAND ROVER unit.
Can 6238-014 have more than one vehicle-side blower configuration?
Yes. LAND ROVER production changes can affect 6238-014; confirm steering position, climate-control specification and the original 6238-014 geometry before approval.
What circuit checks are useful when 6238-014 does not operate?
For 6238-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6238-014 motor again.
Which details should accompany a wholesale request for 6238-014?
Provide item 6238-014, OE JGC500030, the stated application, quantity and destination; add 6238-014 carton or private-label requirements separately.
How can noise be avoided after fitting 6238-014?
Clear debris from the air inlet, check that the 6238-014 wheel turns freely, seat the 6238-014 flange evenly and keep wiring away from the impeller.
Request a quote for 6238-014: Send JGC500030, the 6238-014 application and required quantity for a fitment and supply review.
