HB111BJS7-03 Blower Motor for MAZDA
Primary OE reference: HB111BJS7-03
Cross-reference 1: 8727001530
Cross-reference 2: HB111BJS7-00
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA
Brand: MAZDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
HB111BJS7-03 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference HB111BJS7-03 for application-led sourcing.
For catalogue item 6206-028, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-028 when comparing this HB111BJS7-03 airflow configuration.
OE Reference and Application
The primary catalogue number is HB111BJS7-03. The recorded application is MAZDA. For 6206-028, Measure the HB111BJS7-03 wheel height and outer diameter, then compare the electrical socket and base contour with the HB111BJS7-03 product photos. Record 6206-028 with the approved OE reference.
HVAC Interface and HB111BJS7-03 installation
During work on 6206-028, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after HB111BJS7-03 installation. Recheck 6206-028 before the lower trim is closed.
For item 6206-028, confirm that the HB111BJS7-03 centrifugal wheel clears its housing and that the 6206-028 connector lock engages without force. After seating 6206-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-028.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | HB111BJS7-03 |
| Cross-reference numbers | 8727001530 / HB111BJS7-00 |
| Vehicle brand | MAZDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| HB111BJS7-03 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-028, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6206-028 record remains the picking reference.
For trade item 6206-028, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6206-028 on the packing instruction.
Frequently Asked Questions
How should item 6206-028 and blower number HB111BJS7-03 be verified?
Match 6206-028 to the complete HB111BJS7-03 marking, then compare the 6206-028 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-028 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-028; confirm steering position, climate-control specification and the original 6206-028 geometry before approval.
What circuit checks are useful when 6206-028 does not operate?
For 6206-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-028 motor again.
Which details should accompany a wholesale request for 6206-028?
Provide item 6206-028, OE HB111BJS7-03, the stated application, quantity and destination; add 6206-028 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-028?
Clear debris from the air inlet, check that the 6206-028 wheel turns freely, seat the 6206-028 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-028: Send HB111BJS7-03, the 6206-028 application and required quantity for a fitment and supply review.
