GV7D61B10 Blower Motor for MAZDA 6
Primary OE reference: GV7D61B10
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 6
Brand: MAZDA
Model: 6
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
GV7D61B10 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference GV7D61B10 for application-led sourcing.
For catalogue item 6206-009, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-009 when comparing this GV7D61B10 airflow configuration.
OE Reference and Application
The primary catalogue number is GV7D61B10. The recorded application is MAZDA 6. For 6206-009, Measure the GV7D61B10 wheel height and outer diameter, then compare the electrical socket and base contour with the GV7D61B10 product photos. Record 6206-009 with the approved OE reference.
HVAC Interface and GV7D61B10 installation
During work on 6206-009, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after GV7D61B10 installation. Recheck 6206-009 before the lower trim is closed.
For item 6206-009, confirm that the GV7D61B10 centrifugal wheel clears its housing and that the 6206-009 connector lock engages without force. After seating 6206-009, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-009.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | GV7D61B10 |
| Cross-reference numbers | GV7D61B10 |
| Vehicle brand | MAZDA |
| Vehicle model | 6 |
| Model year | Confirm by OE reference |
| GV7D61B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-009, Packing preparation accounts for the GV7D61B10 motor weight and wheel shape to reduce movement inside the carton. The 6206-009 record remains the picking reference.
For trade item 6206-009, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6206-009 on the packing instruction.
Frequently Asked Questions
How should item 6206-009 and blower number GV7D61B10 be verified?
Match 6206-009 to the complete GV7D61B10 marking, then compare the 6206-009 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-009 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-009; confirm steering position, climate-control specification and the original 6206-009 geometry before approval.
What circuit checks are useful when 6206-009 does not operate?
For 6206-009, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-009 motor again.
Which details should accompany a wholesale request for 6206-009?
Provide item 6206-009, OE GV7D61B10, the stated application, quantity and destination; add 6206-009 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-009?
Clear debris from the air inlet, check that the 6206-009 wheel turns freely, seat the 6206-009 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-009: Send GV7D61B10, the 6206-009 application and required quantity for a fitment and supply review.
