GM3126136 Blower Motor for BUICK
Primary OE reference: GM3126136
Cross-reference 1: GM3126105
Cross-reference 2: 89018435
Cross-reference 3: TYC700156
Cross-reference 4: TYC700155
Cross-reference 5: TYC700159
Cross-reference 6: PM2724
Cross-reference 7: 35059
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK
Brand: BUICK
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
GM3126136 Automotive Blower Motor Overview
This listing links GM3126136 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6208-031, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-031 when comparing this GM3126136 airflow configuration.
OE Reference and Application
The primary catalogue number is GM3126136. The recorded application is BUICK. For 6208-031, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6208-031 with the approved OE reference.
HVAC Interface and GM3126136 installation
During work on 6208-031, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after GM3126136 installation. Recheck 6208-031 before the lower trim is closed.
For item 6208-031, confirm that the GM3126136 centrifugal wheel clears its housing and that the 6208-031 connector lock engages without force. After seating 6208-031, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-031.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | GM3126136 |
| Cross-reference numbers | GM3126105 / 89018435 / TYC700156 / TYC700155 / TYC700159 / PM2724 / 35059 |
| Vehicle brand | BUICK |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| GM3126136 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-031, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-031 record remains the picking reference.
For trade item 6208-031, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6208-031 on the packing instruction.
Frequently Asked Questions
How should item 6208-031 and blower number GM3126136 be verified?
Match 6208-031 to the complete GM3126136 marking, then compare the 6208-031 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-031 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-031; confirm steering position, climate-control specification and the original 6208-031 geometry before approval.
What circuit checks are useful when 6208-031 does not operate?
For 6208-031, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-031 motor again.
Which details should accompany a wholesale request for 6208-031?
Provide item 6208-031, OE GM3126136, the stated application, quantity and destination; add 6208-031 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-031?
Clear debris from the air inlet, check that the 6208-031 wheel turns freely, seat the 6208-031 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-031: Send GM3126136, the 6208-031 application and required quantity for a fitment and supply review.
