FOTZ18504A Blower Motor for FORD E-150
Primary OE reference: FOTZ18504A
Cross-reference 1: XC2Z1980BA
Cross-reference 2: TYC700022
Cross-reference 3: PM290
Cross-reference 4: 35266
Cross-reference 5: 75890
Cross-reference 6: 615-00514
Cross-reference 7: F2TZ18527A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD E-150
Brand: FORD
Model: E-150
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
FOTZ18504A Automotive Blower Motor Overview
The FOTZ18504A record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-048, When the climate-control circuit commands FOTZ18504A airflow, the electric motor rotates the FOTZ18504A fan wheel inside the HVAC housing. Use 6203-048 when comparing this FOTZ18504A airflow configuration.
OE Reference and Application
The primary catalogue number is FOTZ18504A. The recorded application is FORD E-150. For 6203-048, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-048 with the approved OE reference.
HVAC Interface and FOTZ18504A installation
During work on 6203-048, If FOTZ18504A airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the FOTZ18504A motor is the only cause. Recheck 6203-048 before the lower trim is closed.
For item 6203-048, confirm that the FOTZ18504A centrifugal wheel clears its housing and that the 6203-048 connector lock engages without force. After seating 6203-048, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-048.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | FOTZ18504A |
| Cross-reference numbers | XC2Z1980BA / TYC700022 / PM290 / 35266 / 75890 / 615-00514 / F2TZ18527A |
| Vehicle brand | FORD |
| Vehicle model | E-150 |
| Model year | Confirm by OE reference |
| FOTZ18504A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-048, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-048 record remains the picking reference.
For trade item 6203-048, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-048 on the packing instruction.
Frequently Asked Questions
How should item 6203-048 and blower number FOTZ18504A be verified?
Match 6203-048 to the complete FOTZ18504A marking, then compare the 6203-048 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-048 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-048; confirm steering position, climate-control specification and the original 6203-048 geometry before approval.
What circuit checks are useful when 6203-048 does not operate?
For 6203-048, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-048 motor again.
Which details should accompany a wholesale request for 6203-048?
Provide item 6203-048, OE FOTZ18504A, the stated application, quantity and destination; add 6203-048 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-048?
Clear debris from the air inlet, check that the 6203-048 wheel turns freely, seat the 6203-048 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-048: Send FOTZ18504A, the 6203-048 application and required quantity for a fitment and supply review.
