F1EB-19B514-AE Trunk Lid Release Handle Switch without Camera for 2015-2018 Ford Focus
Primary OE reference: F1EB-19B514-AE
Cross-reference 1: F1EB-19B514-AE
Product type: Trunk Lid Handle Release Switch without Camera
Applicable vehicle: 2015-2018 FORD Focus
Installation position: Rear tailgate or trunk-lid release handle
Brand: FORD
Model: Focus
Vehicle year: 2015-2018
Visible identification: Rectangular hand recess, release microswitch and wiring lead
Surface appearance: Black moulded switch housing without camera opening
Physical comparison: Confirm the connector, cable length and camera-free housing before replacing the rear release unit.
Mounting review: Compare the pivot, clips, linkage or electrical connector shown in the saved product images.
Installation preparation: Route the lead away from the latch mechanism and test electrical release before closing the tailgate trim.
Order information: Quote F1EB-19B514-AE, SKU FD02037-003, rear tailgate or trunk-lid release handle and required quantity.
Wholesale note: State destination, packaging preference and whether matching left/right components are required.
Trunk Lid Handle Release Switch without Camera Application
For the 2015-2018 FORD Focus, F1EB-19B514-AE is catalogued as a trunk lid handle release switch without camera at the rear tailgate or trunk-lid release handle. Door position, operating method and rear-side construction define the correct variant.
Visible Profile and Component Identity
This item’s distinguishing form is rectangular hand recess, release microswitch and wiring lead. The pictured black moulded switch housing without camera opening helps separate it from neighbouring catalogue versions.
Product-Specific Selection Notes
The AE version is selected specifically for vehicles that do not use a camera in the handle housing. A smooth camera-free face and the electrical pigtail are the main visual cues. Buyers should not substitute a camera-equipped bezel merely because the outer recess appears similar.
Surface and Workshop Handling
For F1EB-19B514-AE, protect the visible black moulded switch housing without camera opening during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.
Latch or Electrical Interface
Before refitting trim, connect FD02037-003 temporarily and confirm the release signal, connector lock and cable routing. A failed tailgate release is often caused by a loose plug or trapped lead rather than the exterior handle shell.
Related System Diagnosis
If the release remains inactive after FD02037-003 is connected, test vehicle-side voltage, ground continuity and latch operation before replacing F1EB-19B514-AE again. This separates a switch fault from damaged wiring or a seized trunk latch.
Packaging for Trade Orders
For bulk packing, place FD02037-003 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark rear tailgate or trunk-lid release handle on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.
Vehicle and Position Confirmation
Confirm the connector, cable length and camera-free housing before replacing the rear release unit. For F1EB-19B514-AE, confirm 2015-2018 production timing and the rear tailgate or trunk-lid release handle designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.
Automotive Replacement Part Specifications
| Product type | Trunk Lid Handle Release Switch without Camera |
|---|---|
| Primary OE reference | F1EB-19B514-AE |
| Internal item code | FD02037-003 |
| Vehicle brand | FORD |
| Model | Focus |
| Vehicle year | 2015-2018 |
| Applicable vehicle | 2015-2018 FORD Focus |
| Installation position | Rear tailgate or trunk-lid release handle |
| Surface appearance | Black moulded switch housing without camera opening |
| Cross-reference numbers | F1EB-19B514-AE |
Installation and Functional Check
Route the lead away from the latch mechanism and test electrical release before closing the tailgate trim. Once F1EB-19B514-AE is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.
Receiving and Trade Supply
A trade enquiry for FD02037-003 should state F1EB-19B514-AE, 2015-2018 FORD Focus, rear tailgate or trunk-lid release handle, the required finish and order quantity. Receiving staff can identify this exact line by comparing rectangular hand recess, release microswitch and wiring lead with the delivered item.
Frequently Asked Questions
Which vehicle record accompanies F1EB-19B514-AE?
2015-2018 FORD Focus is the recorded application, with installation at the rear tailgate or trunk-lid release handle.
What visual detail separates this item?
Rectangular hand recess, release microswitch and wiring lead is the principal recognition point shown by the photographs.
Why must the installation position be stated?
Adjacent doors and left/right locations can use different hidden carriers even with similar outer styling.
How should operation be verified?
Test release, lever return and trim clearance several times before the door or tailgate is fully reassembled.
Which data speeds up a wholesale quote?
Use SKU FD02037-003, OE F1EB-19B514-AE, application, required quantity, delivery market and colour or finish request.
