DT116360 Blower Motor for RENAULT
Primary OE reference: DT116360
Cross-reference 1: DT116360-5380
Cross-reference 2: DT116243
Cross-reference 3: 272104788R
Product type: Automotive HVAC Blower Motor
Applicable vehicle: RENAULT
Brand: RENAULT
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
DT116360 Automotive Blower Motor Overview
This product entry documents the DT116360 blower unit with practical identification and DT116360 installation checkpoints.
For catalogue item 6225-059, Stable wheel rotation helps distribute air without relying on vehicle speed, making the DT116360 blower important at idle and in traffic. Use 6225-059 when comparing this DT116360 airflow configuration.
OE Reference and Application
The primary catalogue number is DT116360. The recorded application is RENAULT. For 6225-059, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6225-059 with the approved OE reference.
HVAC Interface and DT116360 installation
During work on 6225-059, After DT116360 installation, operate low through high speed and confirm DT116360 airflow reaches the selected vents without abnormal vibration. Recheck 6225-059 before the lower trim is closed.
For item 6225-059, confirm that the DT116360 centrifugal wheel clears its housing and that the 6225-059 connector lock engages without force. After seating 6225-059, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6225-059.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | DT116360 |
| Cross-reference numbers | DT116360-5380 / DT116243 / 272104788R |
| Vehicle brand | RENAULT |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| DT116360 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6225-059, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6225-059 record remains the picking reference.
For trade item 6225-059, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6225-059 on the packing instruction.
Frequently Asked Questions
How should item 6225-059 and blower number DT116360 be verified?
Match 6225-059 to the complete DT116360 marking, then compare the 6225-059 plug, terminal count, mounting flange and wheel dimensions with the removed RENAULT unit.
Can 6225-059 have more than one vehicle-side blower configuration?
Yes. RENAULT production changes can affect 6225-059; confirm steering position, climate-control specification and the original 6225-059 geometry before approval.
What circuit checks are useful when 6225-059 does not operate?
For 6225-059, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6225-059 motor again.
Which details should accompany a wholesale request for 6225-059?
Provide item 6225-059, OE DT116360, the stated application, quantity and destination; add 6225-059 carton or private-label requirements separately.
How can noise be avoided after fitting 6225-059?
Clear debris from the air inlet, check that the 6225-059 wheel turns freely, seat the 6225-059 flange evenly and keep wiring away from the impeller.
Request a quote for 6225-059: Send DT116360, the 6225-059 application and required quantity for a fitment and supply review.
