DS73-F22404-BF Right Exterior Door Handle for 2013 Ford Mondeo
Primary OE reference: DS73-F22404-BF
Cross-reference 1: DS73-F22404-BF
Product type: Right Exterior Door Handle
Applicable vehicle: 2013 FORD Mondeo
Installation position: Right-side exterior door position
Brand: FORD
Model: Mondeo
Vehicle year: 2013
Visible identification: Complete right pull lever with mirrored operating end
Surface appearance: Chrome or colour-coded exterior handle references
Physical comparison: Match the right-side rear arm, handle curvature and cap junction with the original part.
Mounting review: Compare the pivot, clips, linkage or electrical connector shown in the saved product images.
Installation preparation: Insert the pivot end without scratching the aperture and test the latch before final door-panel assembly.
Order information: Quote DS73-F22404-BF, SKU FD02037-030, right-side exterior door position and required quantity.
Wholesale note: State destination, packaging preference and whether matching left/right components are required.
Right Exterior Door Handle Application
Specified for 2013 FORD Mondeo, component DS73-F22404-BF performs the right exterior door handle role at the right-side exterior door position. Its application is defined by position and interface, not simply by a similar outer silhouette.
Visible Profile and Component Identity
Visible evidence includes complete right pull lever with mirrored operating end. The chrome or colour-coded exterior handle references is shown for identification, while final approval should rely on the reverse details.
Product-Specific Selection Notes
The right Mondeo handle shares exterior styling with the left version but reverses the mechanism beneath the grip. The contact sheet includes several colour presentations; side selection must therefore come from the operating end and mounting form, not the finish.
Surface and Workshop Handling
The plated face of DS73-F22404-BF should remain covered during workshop handling. Use non-abrasive cleaning products and keep tools away from the visible edge so the finish is not marked during cable or linkage work.
Latch or Electrical Interface
Before tightening FD02037-030, inspect the latch rod or cable end, pivot pin and return spring for wear. The handle should move the latch through its full travel without side-loading the carrier or scraping the surrounding panel.
Related System Diagnosis
If FD02037-030 feels loose after fitting, inspect the exterior carrier, latch rod engagement and door-skin mounting points before retightening DS73-F22404-BF. Excess force can crack the carrier while leaving the original linkage problem unresolved.
Packaging for Trade Orders
For bulk packing, place FD02037-030 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark right-side exterior door position on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.
Vehicle and Position Confirmation
Match the right-side rear arm, handle curvature and cap junction with the original part. For DS73-F22404-BF, confirm 2013 production timing and the right-side exterior door position designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.
Automotive Replacement Part Specifications
| Product type | Right Exterior Door Handle |
|---|---|
| Primary OE reference | DS73-F22404-BF |
| Internal item code | FD02037-030 |
| Vehicle brand | FORD |
| Model | Mondeo |
| Vehicle year | 2013 |
| Applicable vehicle | 2013 FORD Mondeo |
| Installation position | Right-side exterior door position |
| Surface appearance | Chrome or colour-coded exterior handle references |
| Cross-reference numbers | DS73-F22404-BF |
Installation and Functional Check
Insert the pivot end without scratching the aperture and test the latch before final door-panel assembly. Once DS73-F22404-BF is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.
Receiving and Trade Supply
A trade enquiry for FD02037-030 should state DS73-F22404-BF, 2013 FORD Mondeo, right-side exterior door position, the required finish and order quantity. Receiving staff can identify this exact line by comparing complete right pull lever with mirrored operating end with the delivered item.
Frequently Asked Questions
What is the intended position of DS73-F22404-BF?
Its intended location is the right-side exterior door position on the listed 2013 FORD Mondeo.
How can incoming stock be screened?
Compare complete right pull lever with mirrored operating end and the chrome or colour-coded exterior handle references with the gallery.
Are similar-looking parts automatically equivalent?
No. Equivalence requires matching the mechanism, fixing pattern and any lock or electrical provision.
Which checks follow installation?
Operate the part repeatedly and confirm that it settles flush without loading the trim.
What details are needed for export supply?
Provide DS73-F22404-BF, code FD02037-030, application, position, quantity, destination and packing needs.
