DRF8434012G Blower Motor for MITSUBISHI
Primary OE reference: DRF8434012G
Cross-reference 1: 502725-3170
Cross-reference 2: MR568592
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI
Brand: MITSUBISHI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
DRF8434012G Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference DRF8434012G for application-led sourcing.
For catalogue item 6215-046, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6215-046 when comparing this DRF8434012G airflow configuration.
OE Reference and Application
The primary catalogue number is DRF8434012G. The recorded application is MITSUBISHI. For 6215-046, Measure the DRF8434012G wheel height and outer diameter, then compare the electrical socket and base contour with the DRF8434012G product photos. Record 6215-046 with the approved OE reference.
HVAC Interface and DRF8434012G installation
During work on 6215-046, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after DRF8434012G installation. Recheck 6215-046 before the lower trim is closed.
For item 6215-046, confirm that the DRF8434012G centrifugal wheel clears its housing and that the 6215-046 connector lock engages without force. After seating 6215-046, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-046.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | DRF8434012G |
| Cross-reference numbers | 502725-3170 / MR568592 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| DRF8434012G installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-046, Packing preparation accounts for the DRF8434012G motor weight and wheel shape to reduce movement inside the carton. The 6215-046 record remains the picking reference.
For trade item 6215-046, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6215-046 on the packing instruction.
Frequently Asked Questions
How should item 6215-046 and blower number DRF8434012G be verified?
Match 6215-046 to the complete DRF8434012G marking, then compare the 6215-046 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-046 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-046; confirm steering position, climate-control specification and the original 6215-046 geometry before approval.
What circuit checks are useful when 6215-046 does not operate?
For 6215-046, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-046 motor again.
Which details should accompany a wholesale request for 6215-046?
Provide item 6215-046, OE DRF8434012G, the stated application, quantity and destination; add 6215-046 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-046?
Clear debris from the air inlet, check that the 6215-046 wheel turns freely, seat the 6215-046 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-046: Send DRF8434012G, the 6215-046 application and required quantity for a fitment and supply review.
