DG9H19846AB Blower Motor for FORD Mondeo 2013
Primary OE reference: DG9H19846AB
Cross-reference 1: 5201308
Cross-reference 2: DG9H19846AA
Cross-reference 3: DG9Z19805B
Cross-reference 4: 7T4Z19805A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Mondeo 2013
Brand: FORD
Model: Mondeo
Vehicle year: 2013
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
DG9H19846AB Automotive Blower Motor Overview
YoonShan catalogues DG9H19846AB as an HVAC DG9H19846AB airflow component for workshops, distributors and export buyers.
For catalogue item 6203-003, When the climate-control circuit commands DG9H19846AB airflow, the electric motor rotates the DG9H19846AB fan wheel inside the HVAC housing. Use 6203-003 when comparing this DG9H19846AB airflow configuration.
OE Reference and Application
The primary catalogue number is DG9H19846AB. The recorded application is FORD Mondeo 2013. For 6203-003, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed FORD unit. Record 6203-003 with the approved OE reference.
HVAC Interface and DG9H19846AB installation
During work on 6203-003, If DG9H19846AB airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the DG9H19846AB motor is the only cause. Recheck 6203-003 before the lower trim is closed.
For item 6203-003, confirm that the DG9H19846AB centrifugal wheel clears its housing and that the 6203-003 connector lock engages without force. After seating 6203-003, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-003.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | DG9H19846AB |
| Cross-reference numbers | 5201308 / DG9H19846AA / DG9Z19805B / 7T4Z19805A |
| Vehicle brand | FORD |
| Vehicle model | Mondeo |
| Model year | 2013 |
| DG9H19846AB installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-003, Packing preparation accounts for the DG9H19846AB motor weight and wheel shape to reduce movement inside the carton. The 6203-003 record remains the picking reference.
For trade item 6203-003, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6203-003 on the packing instruction.
Frequently Asked Questions
How should item 6203-003 and blower number DG9H19846AB be verified?
Match 6203-003 to the complete DG9H19846AB marking, then compare the 6203-003 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-003 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-003; confirm steering position, climate-control specification and the original 6203-003 geometry before approval.
What circuit checks are useful when 6203-003 does not operate?
For 6203-003, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-003 motor again.
Which details should accompany a wholesale request for 6203-003?
Provide item 6203-003, OE DG9H19846AB, the stated application, quantity and destination; add 6203-003 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-003?
Clear debris from the air inlet, check that the 6203-003 wheel turns freely, seat the 6203-003 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-003: Send DG9H19846AB, the 6203-003 application and required quantity for a fitment and supply review.
