CN15-17626-BA Front Bumper Lip for FORD EcoSport 2013
Product: Front Bumper Lip
Primary OE: CN15-17626-BA
Item code: FD02002-006
Cross-reference numbers:
CN15-17626-BA
Brand: FORD
Model: EcoSport
Application reference: 2013 FORD EcoSport
Position: Front
Verification: Confirm that CN15-17626-BA matches the intended 2013 FORD EcoSport and verify the unpainted panel on the vehicle.
Supply note: State mixed-order requirements, carton marks and pre-shipment photo needs at the quotation stage.
CN15-17626-BA is catalogued for body-shop enquiries that begin with an exact OE-number match. For 2013 FORD EcoSport, Yongshang Auto tracks the requested front bumper lip as FD02002-006.
FD02002-006 requires an application-specific review: Regional trim packages can change moulding, reflector and lamp interfaces, so model name alone should not be used as the approval method. Those observations should remain available during sample and bulk-order review.
Vehicle-Specific Selection Notes
Fitment guidance for CN15-17626-BA. Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. The repairer should document the outcome before transferring trim components.
The front location on 2013 FORD EcoSport should be reviewed as follows: Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. This approach reduces dependence on exterior appearance alone.
Product Technical Specifications
| Product type | Front Bumper Lip |
|---|---|
| Primary OE reference | CN15-17626-BA |
| Cross-reference numbers | CN15-17626-BA |
| Internal item code | FD02002-006 |
| Vehicle brand | FORD |
| Vehicle model | EcoSport |
| Model year | 2013 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2013 FORD EcoSport |
Exterior Panel Replacement Objective
Functional context for CN15-17626-BA. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. Those observations should remain available during sample and bulk-order review.
Application note for item FD02002-006. The panel brings together openings for service covers, lighting areas, grilles and optional equipment. Their positions must correspond to the actual vehicle specification. The repairer should document the outcome before transferring trim components.
Preparation Sequence for the Body Shop
Receiving note for carton FD02002-006. If the panel has been folded or closely packed for freight, follow the agreed recovery method and allow sufficient time before measuring the final contour. The result should be recorded before commercial release of the requested quantity.
Pre-finish check for 2013 FORD EcoSport. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. Those observations should remain available during sample and bulk-order review.
Wholesale Enquiry Information
A quotation for CN15-17626-BA should reflect this guidance: Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. The completed check supports a traceable discussion between buyer and supplier.
The 2 square images attached to FD02002-006 support visual review. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. The result should be recorded before commercial release of the requested quantity.
Frequently Asked Questions
What should be compared before approving OE CN15-17626-BA?
2013 FORD EcoSport is the stated reference for this page. Inspect the vehicle-side retainers and supports before blaming a panel gap on the replacement part. Damaged hardware can change alignment. This evidence belongs in the same approval file as the vehicle photographs.
Which commercial record should show code FD02002-006?
Supplier-code context for this front bumper lip. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. Keep FD02002-006 beside CN15-17626-BA in the final commercial record.
Which hidden details can distinguish this lower-bumper component from a similar design?
Panel-comparison guidance for 2013 FORD EcoSport. Compare left and right corner shape, the main edge line and all functional cut-outs. The overall styling view is not enough for approval. That comparison gives the workshop a clearer basis for a pre-paint decision.
When can the body shop release this lower-bumper component to the paint area?
Finishing guidance for OE CN15-17626-BA. The body shop should verify the complete assembly interface before any irreversible preparation is carried out. The completed check supports a traceable discussion between buyer and supplier.
Which logistics details should be discussed with quantity?
Wholesale request for FD02002-006. Keep the OE reference and internal code on every enquiry revision, purchase order and packing confirmation to reduce mix-ups during consolidation. A dated photo record makes the decision easier to review if questions arise later.
Request a Quote for CN15-17626-BA
If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. For Yongshang Auto’s review, connect CN15-17626-BA and FD02002-006 with the intended 2013 FORD EcoSport, requested quantity and delivery market.
