CJ5Z-17906-A Bumper Reinforcement for FORD Kuga / Escape 2013 Rear
Primary OE reference: CJ5Z-17906-A
Product type: Bumper Reinforcement
Applicable vehicle: FORD Kuga / Escape 2013
Installation position: Rear bumper
Brand: FORD
Model: Kuga / Escape
Vehicle year: 2013
Physical comparison: Measure the principal mounting-hole spacing and inspect for CJ5Z-17906-A any welded studs, captive nuts or locator slots.
Component design: The photographed configuration shows the supplied reinforcement for CJ5Z-17906-A or absorber profile for direct comparison.
Installation guidance: Clean the mounting faces, transfer only confirmed for CJ5Z-17906-A reusable hardware and tighten fasteners in an even sequence.
Wholesale enquiry: Include production year and market version in for CJ5Z-17906-A the enquiry when an OE catalogue lists a transition part.
CJ5Z-17906-A Bumper Reinforcement Overview
This CJ5Z-17906-A listing covers the rear bumper reinforcement for FORD Kuga / Escape 2013. Its photographed mounting form identifies the supplied version.
The component occupies the space between the for CJ5Z-17906-A bumper skin and vehicle body, where bracket offset determines fitment.
Application-Specific Selection
Compare reinforcement width, section shape and the for CJ5Z-17906-A position of every attachment point before paint or installation.
Confirm CJ5Z-17906-A against the production period and rear bumper location. Similar covers on FORD Kuga / Escape 2013 can conceal different support sections.
End Brackets and Centre Section
The assembly combines a transverse section with for CJ5Z-17906-A model-specific end supports for the stated vehicle position.
Confirm the left and right end brackets for CJ5Z-17906-A face the correct direction and sit square against the body mounting faces.
Body-Shop Installation Check
Remove the bumper cover using the workshop for CJ5Z-17906-A sequence, support surrounding trim and expose all original fasteners before loosening the beam.
Before installing CJ5Z-17906-A, a qualified repair professional should assess collision distortion at the FORD Kuga / Escape 2013 mounting faces.
Automotive Component Specifications
| Product type | Bumper Reinforcement |
|---|---|
| Primary OE reference | CJ5Z-17906-A |
| Cross-reference numbers | CJ5Z-17906-A |
| Internal item code | FD03004-002 |
| Vehicle brand | FORD |
| Vehicle model | Kuga / Escape |
| Model year | 2013 |
| Installation position | Rear bumper |
Trade Ordering Notes
For consolidated export orders, list each application for CJ5Z-17906-A separately and confirm packing protection for projecting brackets.
Frequently Asked Questions
How is CJ5Z-17906-A fitment verified?
Confirm CJ5Z-17906-A against FORD Kuga / Escape 2013, the rear position and the complete mounting geometry shown in the product photo.
Which physical points should be compared?
Compare the beam span, end-bracket offset and for CJ5Z-17906-A bolt-hole centres with the removed component before fitting.
Is CJ5Z-17906-A a universal bumper component?
No. The CJ5Z-17906-A span, absorber profile, brackets and mounting points are specific to FORD Kuga / Escape 2013.
What preparation is recommended for CJ5Z-17906-A?
Use suitable support during removal because a for CJ5Z-17906-A long reinforcement can rotate after the last fastener is released.
Which details support a CJ5Z-17906-A trade quotation?
Provide planned quantity and delivery country together for CJ5Z-17906-A with the verified part reference for accurate trade handling.
Need a quotation for CJ5Z-17906-A? Contact Yongshang Auto with vehicle, bumper position, quantity and destination.
