C00074203 Blower Motor for MAXUS G10
Primary OE reference: C00074203
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAXUS G10
Brand: MAXUS
Model: G10
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
C00074203 Automotive Blower Motor Overview
Reference C00074203 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6255-001, the C00074203 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6255-001 when comparing this C00074203 airflow configuration.
OE Reference and Application
The primary catalogue number is C00074203. The recorded application is MAXUS G10. For 6255-001, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6255-001 with the approved OE reference.
HVAC Interface and C00074203 installation
During work on 6255-001, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6255-001 before the lower trim is closed.
For item 6255-001, confirm that the C00074203 centrifugal wheel clears its housing and that the 6255-001 connector lock engages without force. After seating 6255-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6255-001.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | C00074203 |
| Cross-reference numbers | C00074203 |
| Vehicle brand | MAXUS |
| Vehicle model | G10 |
| Model year | Confirm by OE reference |
| C00074203 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6255-001, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6255-001 record remains the picking reference.
For trade item 6255-001, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6255-001 on the packing instruction.
Frequently Asked Questions
How should item 6255-001 and blower number C00074203 be verified?
Match 6255-001 to the complete C00074203 marking, then compare the 6255-001 plug, terminal count, mounting flange and wheel dimensions with the removed MAXUS unit.
Can 6255-001 have more than one vehicle-side blower configuration?
Yes. MAXUS production changes can affect 6255-001; confirm steering position, climate-control specification and the original 6255-001 geometry before approval.
What circuit checks are useful when 6255-001 does not operate?
For 6255-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6255-001 motor again.
Which details should accompany a wholesale request for 6255-001?
Provide item 6255-001, OE C00074203, the stated application, quantity and destination; add 6255-001 carton or private-label requirements separately.
How can noise be avoided after fitting 6255-001?
Clear debris from the air inlet, check that the 6255-001 wheel turns freely, seat the 6255-001 flange evenly and keep wiring away from the impeller.
Request a quote for 6255-001: Send C00074203, the 6255-001 application and required quantity for a fitment and supply review.
