BS1C61B10 Blower Motor for MAZDA 3
Primary OE reference: BS1C61B10
Cross-reference 1: BP4K61B10
Cross-reference 2: MA3126105
Cross-reference 3: 700094
Cross-reference 4: 34101
Cross-reference 5: 8940000270
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA 3
Brand: MAZDA
Model: 3
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
BS1C61B10 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use BS1C61B10 together with the BS1C61B10 product images and vehicle data on this page.
For catalogue item 6206-012, the BS1C61B10 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6206-012 when comparing this BS1C61B10 airflow configuration.
OE Reference and Application
The primary catalogue number is BS1C61B10. The recorded application is MAZDA 3. For 6206-012, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6206-012 with the approved OE reference.
HVAC Interface and BS1C61B10 installation
During work on 6206-012, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6206-012 before the lower trim is closed.
For item 6206-012, confirm that the BS1C61B10 centrifugal wheel clears its housing and that the 6206-012 connector lock engages without force. After seating 6206-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-012.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | BS1C61B10 |
| Cross-reference numbers | BP4K61B10 / MA3126105 / 700094 / 34101 / 8940000270 |
| Vehicle brand | MAZDA |
| Vehicle model | 3 |
| Model year | Confirm by OE reference |
| BS1C61B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-012, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6206-012 record remains the picking reference.
For trade item 6206-012, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6206-012 on the packing instruction.
Frequently Asked Questions
How should item 6206-012 and blower number BS1C61B10 be verified?
Match 6206-012 to the complete BS1C61B10 marking, then compare the 6206-012 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-012 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-012; confirm steering position, climate-control specification and the original 6206-012 geometry before approval.
What circuit checks are useful when 6206-012 does not operate?
For 6206-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-012 motor again.
Which details should accompany a wholesale request for 6206-012?
Provide item 6206-012, OE BS1C61B10, the stated application, quantity and destination; add 6206-012 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-012?
Clear debris from the air inlet, check that the 6206-012 wheel turns freely, seat the 6206-012 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-012: Send BS1C61B10, the 6206-012 application and required quantity for a fitment and supply review.
