BS-60-010 Blower Motor for FORD
Primary OE reference: BS-60-010
Cross-reference 1: CXA-2159
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
BS-60-010 Automotive Blower Motor Overview
This listing links BS-60-010 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6203-029, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-029 when comparing this BS-60-010 airflow configuration.
OE Reference and Application
The primary catalogue number is BS-60-010. The recorded application is FORD. For 6203-029, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-029 with the approved OE reference.
HVAC Interface and BS-60-010 installation
During work on 6203-029, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after BS-60-010 installation. Recheck 6203-029 before the lower trim is closed.
For item 6203-029, confirm that the BS-60-010 centrifugal wheel clears its housing and that the 6203-029 connector lock engages without force. After seating 6203-029, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-029.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | BS-60-010 |
| Cross-reference numbers | CXA-2159 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| BS-60-010 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-029, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-029 record remains the picking reference.
For trade item 6203-029, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-029 on the packing instruction.
Frequently Asked Questions
How should item 6203-029 and blower number BS-60-010 be verified?
Match 6203-029 to the complete BS-60-010 marking, then compare the 6203-029 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-029 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-029; confirm steering position, climate-control specification and the original 6203-029 geometry before approval.
What circuit checks are useful when 6203-029 does not operate?
For 6203-029, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-029 motor again.
Which details should accompany a wholesale request for 6203-029?
Provide item 6203-029, OE BS-60-010, the stated application, quantity and destination; add 6203-029 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-029?
Clear debris from the air inlet, check that the 6203-029 wheel turns freely, seat the 6203-029 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-029: Send BS-60-010, the 6203-029 application and required quantity for a fitment and supply review.
