BM51-17C625-AB Washer Reservoir Mounting Bracket for 2012 Ford Focus
Primary OE reference: BM51-17C625-AB
Cross-reference 1: BM51-17C625-AB
Product type: Washer Reservoir Mounting Bracket
Applicable vehicle: 2012 FORD Focus
Installation position: Engine-bay washer-fluid reservoir
Brand: FORD
Model: Focus
Vehicle year: 2012
Identification detail: formed support bracket with reservoir and body attachment points
Fitment basis: Match BM51-17C625-AB, thread or hole size, shoulder length and contact surface.
Installation guidance: Align the support without forcing it; fit original cushions and compatible fasteners in their recorded positions.
Purchase reference: Quote SKU FD02042-004, OE number, vehicle application and quantity.
BM51-17C625-AB Washer Reservoir Mounting Bracket Overview
BM51-17C625-AB is the listed washer reservoir mounting bracket for 2012 FORD Focus. The bracket holds the washer bottle clear of surrounding bodywork and limits movement on rough roads.
Product-Specific Fitment
Use the product photographs to compare formed support bracket with reservoir and body attachment points. Inspect the mating stud, bracket or body opening because a similar-looking fastener may have a different pitch, shoulder or locating depth.
Workshop Installation Method
Place BM51-17C625-AB against the original body points before tightening. Confirm that its bends, support faces and cable or hose clearances match the removed carrier.
Functional Check After Assembly
After fitting, check that the supported component remains stable through its normal movement and temperature range. Recheck access for later service and verify nearby hoses or wiring are not pinched.
Warehouse Identification
Store SKU FD02042-004 under BM51-17C625-AB with the FORD Focus application and engine-bay washer-fluid reservoir recorded on the bin label. Keep small threaded pieces bagged separately; protect formed brackets from stacking loads that could change their geometry.
Washer Bottle Support Geometry
Compare the reservoir cradle angle, upper tab and body-side holes as one set. The bottle must remain upright so the pump seal stays submerged, and the bracket must leave room for the filler neck and electrical connector during routine washer-fluid service.
Automotive Replacement Part Specifications
| Product type | Washer Reservoir Mounting Bracket |
|---|---|
| Primary OE reference | BM51-17C625-AB |
| Internal item code | FD02042-004 |
| Vehicle brand | FORD |
| Model | Focus |
| Vehicle year | 2012 |
| Applicable vehicle | 2012 FORD Focus |
| Installation position | Engine-bay washer-fluid reservoir |
| Identification detail | formed support bracket with reservoir and body attachment points |
| Cross-reference numbers | BM51-17C625-AB |
Packing and Trade Supply
Protect threads and exposed locating ends with sleeves or caps. Pack SKU FD02042-004 so finished faces and bracket bends cannot rub against loose hardware in transit.
Frequently Asked Questions
What does BM51-17C625-AB identify?
BM51-17C625-AB identifies the stated washer reservoir mounting bracket for 2012 FORD Focus.
Which features should be compared for FD02042-004?
Check formed support bracket with reservoir and body attachment points, then verify every thread, shoulder, hole and contact face.
Can a similar fastener be substituted?
Only after confirming dimensions, material function and the load carried by the mounting point.
What installation practice is recommended?
Dry-fit the support, preserve isolators and tighten compatible fasteners evenly.
What information is required for wholesale supply?
Provide BM51-17C625-AB, SKU FD02042-004, vehicle details, destination and order quantity.
