BG1P61B10 Blower Motor for MAZDA
Primary OE reference: BG1P61B10
Cross-reference 1: CB0761B10A
Cross-reference 2: BJ0E61B10
Cross-reference 3: BM00010C
Cross-reference 4: 1800031
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MAZDA
Brand: MAZDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
BG1P61B10 Automotive Blower Motor Overview
This listing links BG1P61B10 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6206-032, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-032 when comparing this BG1P61B10 airflow configuration.
OE Reference and Application
The primary catalogue number is BG1P61B10. The recorded application is MAZDA. For 6206-032, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-032 with the approved OE reference.
HVAC Interface and BG1P61B10 installation
During work on 6206-032, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after BG1P61B10 installation. Recheck 6206-032 before the lower trim is closed.
For item 6206-032, confirm that the BG1P61B10 centrifugal wheel clears its housing and that the 6206-032 connector lock engages without force. After seating 6206-032, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-032.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | BG1P61B10 |
| Cross-reference numbers | CB0761B10A / BJ0E61B10 / BM00010C / 1800031 |
| Vehicle brand | MAZDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| BG1P61B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6206-032, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-032 record remains the picking reference.
For trade item 6206-032, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6206-032 on the packing instruction.
Frequently Asked Questions
How should item 6206-032 and blower number BG1P61B10 be verified?
Match 6206-032 to the complete BG1P61B10 marking, then compare the 6206-032 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-032 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-032; confirm steering position, climate-control specification and the original 6206-032 geometry before approval.
What circuit checks are useful when 6206-032 does not operate?
For 6206-032, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-032 motor again.
Which details should accompany a wholesale request for 6206-032?
Provide item 6206-032, OE BG1P61B10, the stated application, quantity and destination; add 6206-032 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-032?
Clear debris from the air inlet, check that the 6206-032 wheel turns freely, seat the 6206-032 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-032: Send BG1P61B10, the 6206-032 application and required quantity for a fitment and supply review.
