A2228202214 Blower Motor for MERCEDES-BENZ S-Class
Primary OE reference: A2228202214
Cross-reference 1: 2228202214
Cross-reference 2: 87461
Cross-reference 3: KM9784
Cross-reference 4: 34281
Cross-reference 5: 128189N
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ S-Class
Brand: MERCEDES-BENZ
Model: S-Class
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
A2228202214 Automotive Blower Motor Overview
Reference A2228202214 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6233-055, the A2228202214 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6233-055 when comparing this A2228202214 airflow configuration.
OE Reference and Application
The primary catalogue number is A2228202214. The recorded application is MERCEDES-BENZ S-Class. For 6233-055, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6233-055 with the approved OE reference.
HVAC Interface and A2228202214 installation
During work on 6233-055, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6233-055 before the lower trim is closed.
For item 6233-055, confirm that the A2228202214 centrifugal wheel clears its housing and that the 6233-055 connector lock engages without force. After seating 6233-055, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-055.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | A2228202214 |
| Cross-reference numbers | 2228202214 / 87461 / KM9784 / 34281 / 128189N |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | S-Class |
| Model year | Confirm by OE reference |
| A2228202214 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6233-055, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6233-055 record remains the picking reference.
For trade item 6233-055, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6233-055 on the packing instruction.
Frequently Asked Questions
How should item 6233-055 and blower number A2228202214 be verified?
Match 6233-055 to the complete A2228202214 marking, then compare the 6233-055 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6233-055 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6233-055; confirm steering position, climate-control specification and the original 6233-055 geometry before approval.
What circuit checks are useful when 6233-055 does not operate?
For 6233-055, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-055 motor again.
Which details should accompany a wholesale request for 6233-055?
Provide item 6233-055, OE A2228202214, the stated application, quantity and destination; add 6233-055 carton or private-label requirements separately.
How can noise be avoided after fitting 6233-055?
Clear debris from the air inlet, check that the 6233-055 wheel turns freely, seat the 6233-055 flange evenly and keep wiring away from the impeller.
Request a quote for 6233-055: Send A2228202214, the 6233-055 application and required quantity for a fitment and supply review.
