A2218202714 Blower Motor for MERCEDES-BENZ S-Class
Primary OE reference: A2218202714
Cross-reference 1: A2218200514
Cross-reference 2: 2218202714
Cross-reference 3: 2218200514
Cross-reference 4: 8EW351041681
Cross-reference 5: LFH15221
Cross-reference 6: KM3751
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ S-Class
Brand: MERCEDES-BENZ
Model: S-Class
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
A2218202714 Automotive Blower Motor Overview
Reference A2218202714 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6232-014, the A2218202714 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6232-014 when comparing this A2218202714 airflow configuration.
OE Reference and Application
The primary catalogue number is A2218202714. The recorded application is MERCEDES-BENZ S-Class. For 6232-014, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6232-014 with the approved OE reference.
HVAC Interface and A2218202714 installation
During work on 6232-014, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6232-014 before the lower trim is closed.
For item 6232-014, confirm that the A2218202714 centrifugal wheel clears its housing and that the 6232-014 connector lock engages without force. After seating 6232-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-014.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | A2218202714 |
| Cross-reference numbers | A2218200514 / 2218202714 / 2218200514 / 8EW351041681 / LFH15221 / KM3751 |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | S-Class |
| Model year | Confirm by OE reference |
| A2218202714 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6232-014, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6232-014 record remains the picking reference.
For trade item 6232-014, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6232-014 on the packing instruction.
Frequently Asked Questions
How should item 6232-014 and blower number A2218202714 be verified?
Match 6232-014 to the complete A2218202714 marking, then compare the 6232-014 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6232-014 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6232-014; confirm steering position, climate-control specification and the original 6232-014 geometry before approval.
What circuit checks are useful when 6232-014 does not operate?
For 6232-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-014 motor again.
Which details should accompany a wholesale request for 6232-014?
Provide item 6232-014, OE A2218202714, the stated application, quantity and destination; add 6232-014 carton or private-label requirements separately.
How can noise be avoided after fitting 6232-014?
Clear debris from the air inlet, check that the 6232-014 wheel turns freely, seat the 6232-014 flange evenly and keep wiring away from the impeller.
Request a quote for 6232-014: Send A2218202714, the 6232-014 application and required quantity for a fitment and supply review.
