A0008307908 Blower Motor for MERCEDES-BENZ
Primary OE reference: A0008307908
Cross-reference 1: DDM007TT
Cross-reference 2: A0008308208
Cross-reference 3: V30031711
Cross-reference 4: 741590N
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MERCEDES-BENZ
Brand: MERCEDES-BENZ
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
A0008307908 Automotive Blower Motor Overview
Reference A0008307908 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6232-057, the A0008307908 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6232-057 when comparing this A0008307908 airflow configuration.
OE Reference and Application
The primary catalogue number is A0008307908. The recorded application is MERCEDES-BENZ. For 6232-057, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6232-057 with the approved OE reference.
HVAC Interface and A0008307908 installation
During work on 6232-057, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6232-057 before the lower trim is closed.
For item 6232-057, confirm that the A0008307908 centrifugal wheel clears its housing and that the 6232-057 connector lock engages without force. After seating 6232-057, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-057.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | A0008307908 |
| Cross-reference numbers | DDM007TT / A0008308208 / V30031711 / 741590N |
| Vehicle brand | MERCEDES-BENZ |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| A0008307908 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6232-057, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6232-057 record remains the picking reference.
For trade item 6232-057, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6232-057 on the packing instruction.
Frequently Asked Questions
How should item 6232-057 and blower number A0008307908 be verified?
Match 6232-057 to the complete A0008307908 marking, then compare the 6232-057 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.
Can 6232-057 have more than one vehicle-side blower configuration?
Yes. MERCEDES-BENZ production changes can affect 6232-057; confirm steering position, climate-control specification and the original 6232-057 geometry before approval.
What circuit checks are useful when 6232-057 does not operate?
For 6232-057, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-057 motor again.
Which details should accompany a wholesale request for 6232-057?
Provide item 6232-057, OE A0008307908, the stated application, quantity and destination; add 6232-057 carton or private-label requirements separately.
How can noise be avoided after fitting 6232-057?
Clear debris from the air inlet, check that the 6232-057 wheel turns freely, seat the 6232-057 flange evenly and keep wiring away from the impeller.
Request a quote for 6232-057: Send A0008307908, the 6232-057 application and required quantity for a fitment and supply review.
