9A210604902 Automotive Water Pump for PORSCHE 911
Product: Automotive Water Pump
Primary OE: 9A210604902
Item code: PSE01017-008
Cross-reference numbers:
9A210604902
0PB121004A
0PB121005C
0PB121010D
Brand: PORSCHE
Model: 911
Application reference: PORSCHE OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Confirm whether gaskets or service hardware are required.
9A210604902 helps buyers distinguish the required water pump. This PORSCHE 911 record identifies SKU PSE01017008 through OE evidence. Buyers can therefore separate 9A210604902 from similar-looking pumps.
Application approval for 9A210604902 should combine the parts catalogue, VIN and removed component. The workbook provides 911 as a model reference, but SKU PSE01017008 still requires vehicle-specific confirmation.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 9A210604902 |
| Internal item code | PSE01017-008 |
| Vehicle brand | PORSCHE |
| Model filter | 911 |
| Cross-reference numbers | 9A210604902 / 0PB121004A / 0PB121005C / 0PB121010D |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Using OE and Removed-Part Evidence
Use 9A210604902 as the first catalogue key, then confirm PSE01017008 with the PORSCHE VIN and production date. An OE match alone is not sufficient when an engine family has mid-cycle changes.
Before approving PSE01017008, enter 9A210604902 in the relevant PORSCHE parts catalogue. Check engine code, build period and any supersession notes returned by the VIN.
The workbook names 911 as an application clue for 9A210604902; vehicle-specific catalogue evidence still governs the final match.
Pump Duty During Vehicle Operation
The purpose of 9A210604902 on undefined vehicles is continuous coolant delivery. Stable flow reduces local hot spots and supports predictable thermostat and radiator operation.
Within the undefined cooling circuit, 9A210604902 drives coolant through passages, hoses and the radiator. Pump condition therefore affects temperature stability throughout a drive cycle.
Bleeding and Post-Repair Checks
Handle PSE01017008 by its housing and protect the gasket face. Follow the specified tightening sequence for 9A210604902, refill slowly and confirm heater circulation during bleeding.
Do not install 9A210604902 into a dirty circuit. Examine PSE01017008, renew approved sealing parts and verify free rotation before the engine is started.
Pump Geometry Inspection
Check 9A210604902 for the correct impeller side, bearing hub and housing geometry. On PSE01017008, even a small offset at the gasket surface can prevent a dependable seal.
Place the original unit and PSE01017008 in the same orientation. Verify that 9A210604902 shares the same flange plane, ports, drive interface and sealing profile.
Supply Planning for Repair Programs
For a PORSCHE purchasing review, send 9A210604902 together with the required volume and shipping country. Quote PSE01017008 when discussing carton marks or sample approval.
Wholesale enquiries should state 9A210604902, PSE01017008, order quantity and destination. PORSCHE distributors can also request neutral packing, label review and a pre-production sample.
Buyer Questions About This Water Pump
What does 9A210604902 do in the cooling system?
OE 9A210604902 identifies an engine water pump. In the PORSCHE 911 cooling circuit, 9A210604902 circulates coolant between heat-generating and heat-rejecting components.
What should an importer check before ordering 9A210604902?
Approve 9A210604902 with VIN and catalogue data. Match SKU PSE01017008 against the removed pump. Production changes can alter 9A210604902 mounting or drive details.
Which physical details should match on 9A210604902?
Compare the 9A210604902 housing, flange, ports, hub or pulley, impeller side and sealing face. Use the PSE01017008 gallery for orientation. Measure 9A210604902 before installation.
Which symptoms justify checking 9A210604902?
Inspect 9A210604902 after coolant leakage, bearing noise, overheating or unstable circulation. During PSE01017008 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 9A210604902 is the only cause.
What information speeds up sourcing of 9A210604902?
Request 9A210604902 pricing with item code PSE01017008. Add quantity, destination and packaging instructions. Send original-part evidence when 9A210604902 needs application review.
Request Pricing for 9A210604902
Send 9A210604902 quantity and destination to Yongshang Auto. Identify the request with SKU PSE01017008. Add packing details and original-pump evidence when 9A210604902 needs application review.
Application note: 9A210604902 identifies the reference, not guaranteed fitment. Confirm SKU PSE01017008 through VIN, engine data and removed-pump comparison.
