97945-4H000 Blower Motor for HYUNDAI Grand Starex
Primary OE reference: 97945-4H000
Cross-reference 1: 97946-4H000
Cross-reference 2: 97235-3K000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI Grand Starex
Brand: HYUNDAI
Model: Grand Starex
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97945-4H000 Automotive Blower Motor Overview
The 97945-4H000 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6202-020, When the climate-control circuit commands 97945-4H000 airflow, the electric motor rotates the 97945-4H000 fan wheel inside the HVAC housing. Use 6202-020 when comparing this 97945-4H000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97945-4H000. The recorded application is HYUNDAI Grand Starex. For 6202-020, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6202-020 with the approved OE reference.
HVAC Interface and 97945-4H000 installation
During work on 6202-020, If 97945-4H000 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 97945-4H000 motor is the only cause. Recheck 6202-020 before the lower trim is closed.
For item 6202-020, confirm that the 97945-4H000 centrifugal wheel clears its housing and that the 6202-020 connector lock engages without force. After seating 6202-020, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-020.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97945-4H000 |
| Cross-reference numbers | 97946-4H000 / 97235-3K000 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Grand Starex |
| Model year | Confirm by OE reference |
| 97945-4H000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-020, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6202-020 record remains the picking reference.
For trade item 6202-020, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6202-020 on the packing instruction.
Frequently Asked Questions
How should item 6202-020 and blower number 97945-4H000 be verified?
Match 6202-020 to the complete 97945-4H000 marking, then compare the 6202-020 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-020 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-020; confirm steering position, climate-control specification and the original 6202-020 geometry before approval.
What circuit checks are useful when 6202-020 does not operate?
For 6202-020, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-020 motor again.
Which details should accompany a wholesale request for 6202-020?
Provide item 6202-020, OE 97945-4H000, the stated application, quantity and destination; add 6202-020 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-020?
Clear debris from the air inlet, check that the 6202-020 wheel turns freely, seat the 6202-020 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-020: Send 97945-4H000, the 6202-020 application and required quantity for a fitment and supply review.
