97113L1100 Blower Motor for HYUNDAI Sonata
Primary OE reference: 97113L1100
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI Sonata
Brand: HYUNDAI
Model: Sonata
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113L1100 Automotive Blower Motor Overview
This listing links 97113L1100 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6201-040, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6201-040 when comparing this 97113L1100 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113L1100. The recorded application is HYUNDAI Sonata. For 6201-040, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6201-040 with the approved OE reference.
HVAC Interface and 97113L1100 installation
During work on 6201-040, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 97113L1100 installation. Recheck 6201-040 before the lower trim is closed.
For item 6201-040, confirm that the 97113L1100 centrifugal wheel clears its housing and that the 6201-040 connector lock engages without force. After seating 6201-040, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-040.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113L1100 |
| Cross-reference numbers | 97113L1100 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Sonata |
| Model year | Confirm by OE reference |
| 97113L1100 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-040, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-040 record remains the picking reference.
For trade item 6201-040, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6201-040 on the packing instruction.
Frequently Asked Questions
How should item 6201-040 and blower number 97113L1100 be verified?
Match 6201-040 to the complete 97113L1100 marking, then compare the 6201-040 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6201-040 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6201-040; confirm steering position, climate-control specification and the original 6201-040 geometry before approval.
What circuit checks are useful when 6201-040 does not operate?
For 6201-040, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-040 motor again.
Which details should accompany a wholesale request for 6201-040?
Provide item 6201-040, OE 97113L1100, the stated application, quantity and destination; add 6201-040 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-040?
Clear debris from the air inlet, check that the 6201-040 wheel turns freely, seat the 6201-040 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-040: Send 97113L1100, the 6201-040 application and required quantity for a fitment and supply review.
