97113B1000 Blower Motor for HYUNDAI G80 2022
Primary OE reference: 97113B1000
Cross-reference 1: 97113D2000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI G80 2022
Brand: HYUNDAI
Model: G80
Vehicle year: 2022
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113B1000 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 97113B1000 to support OE-number comparison before purchase.
For catalogue item 6201-038, Cabin 97113B1000 airflow depends on the 97113B1000 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6201-038 when comparing this 97113B1000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113B1000. The recorded application is HYUNDAI G80 2022. For 6201-038, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6201-038 with the approved OE reference.
HVAC Interface and 97113B1000 installation
During work on 6201-038, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6201-038 before the lower trim is closed.
For item 6201-038, confirm that the 97113B1000 centrifugal wheel clears its housing and that the 6201-038 connector lock engages without force. After seating 6201-038, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-038.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113B1000 |
| Cross-reference numbers | 97113D2000 |
| Vehicle brand | HYUNDAI |
| Vehicle model | G80 |
| Model year | 2022 |
| 97113B1000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-038, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-038 record remains the picking reference.
For trade item 6201-038, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6201-038 on the packing instruction.
Frequently Asked Questions
How should item 6201-038 and blower number 97113B1000 be verified?
Match 6201-038 to the complete 97113B1000 marking, then compare the 6201-038 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6201-038 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6201-038; confirm steering position, climate-control specification and the original 6201-038 geometry before approval.
What circuit checks are useful when 6201-038 does not operate?
For 6201-038, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-038 motor again.
Which details should accompany a wholesale request for 6201-038?
Provide item 6201-038, OE 97113B1000, the stated application, quantity and destination; add 6201-038 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-038?
Clear debris from the air inlet, check that the 6201-038 wheel turns freely, seat the 6201-038 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-038: Send 97113B1000, the 6201-038 application and required quantity for a fitment and supply review.
