971132F500 Blower Motor for KIA Cerato
Primary OE reference: 971132F500
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA Cerato
Brand: KIA
Model: Cerato
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
971132F500 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 971132F500 together with the 971132F500 product images and vehicle data on this page.
For catalogue item 6201-043, the 971132F500 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6201-043 when comparing this 971132F500 airflow configuration.
OE Reference and Application
The primary catalogue number is 971132F500. The recorded application is KIA Cerato. For 6201-043, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6201-043 with the approved OE reference.
HVAC Interface and 971132F500 installation
During work on 6201-043, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6201-043 before the lower trim is closed.
For item 6201-043, confirm that the 971132F500 centrifugal wheel clears its housing and that the 6201-043 connector lock engages without force. After seating 6201-043, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-043.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 971132F500 |
| Cross-reference numbers | 971132F500 |
| Vehicle brand | KIA |
| Vehicle model | Cerato |
| Model year | Confirm by OE reference |
| 971132F500 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-043, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6201-043 record remains the picking reference.
For trade item 6201-043, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6201-043 on the packing instruction.
Frequently Asked Questions
How should item 6201-043 and blower number 971132F500 be verified?
Match 6201-043 to the complete 971132F500 marking, then compare the 6201-043 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-043 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-043; confirm steering position, climate-control specification and the original 6201-043 geometry before approval.
What circuit checks are useful when 6201-043 does not operate?
For 6201-043, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-043 motor again.
Which details should accompany a wholesale request for 6201-043?
Provide item 6201-043, OE 971132F500, the stated application, quantity and destination; add 6201-043 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-043?
Clear debris from the air inlet, check that the 6201-043 wheel turns freely, seat the 6201-043 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-043: Send 971132F500, the 6201-043 application and required quantity for a fitment and supply review.
