971131U000 Blower Motor for KIA Sportage
Primary OE reference: 971131U000
Cross-reference 1: 971132Y000
Cross-reference 2: 971134R000
Cross-reference 3: 971133X000
Cross-reference 4: BL0540005
Cross-reference 5: DD0301TT
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA Sportage
Brand: KIA
Model: Sportage
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
971131U000 Automotive Blower Motor Overview
Reference 971131U000 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6201-024, the 971131U000 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6201-024 when comparing this 971131U000 airflow configuration.
OE Reference and Application
The primary catalogue number is 971131U000. The recorded application is KIA Sportage. For 6201-024, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6201-024 with the approved OE reference.
HVAC Interface and 971131U000 installation
During work on 6201-024, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6201-024 before the lower trim is closed.
For item 6201-024, confirm that the 971131U000 centrifugal wheel clears its housing and that the 6201-024 connector lock engages without force. After seating 6201-024, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-024.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 971131U000 |
| Cross-reference numbers | 971132Y000 / 971134R000 / 971133X000 / BL0540005 / DD0301TT |
| Vehicle brand | KIA |
| Vehicle model | Sportage |
| Model year | Confirm by OE reference |
| 971131U000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-024, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-024 record remains the picking reference.
For trade item 6201-024, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6201-024 on the packing instruction.
Frequently Asked Questions
How should item 6201-024 and blower number 971131U000 be verified?
Match 6201-024 to the complete 971131U000 marking, then compare the 6201-024 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-024 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-024; confirm steering position, climate-control specification and the original 6201-024 geometry before approval.
What circuit checks are useful when 6201-024 does not operate?
For 6201-024, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-024 motor again.
Which details should accompany a wholesale request for 6201-024?
Provide item 6201-024, OE 971131U000, the stated application, quantity and destination; add 6201-024 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-024?
Clear debris from the air inlet, check that the 6201-024 wheel turns freely, seat the 6201-024 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-024: Send 971131U000, the 6201-024 application and required quantity for a fitment and supply review.
