97113-J2000 Blower Motor for KIA Soul
Primary OE reference: 97113-J2000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA Soul
Brand: KIA
Model: Soul
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-J2000 Automotive Blower Motor Overview
This product entry documents the 97113-J2000 blower unit with practical identification and 97113-J2000 installation checkpoints.
For catalogue item 6201-056, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 97113-J2000 blower important at idle and in traffic. Use 6201-056 when comparing this 97113-J2000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-J2000. The recorded application is KIA Soul. For 6201-056, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6201-056 with the approved OE reference.
HVAC Interface and 97113-J2000 installation
During work on 6201-056, After 97113-J2000 installation, operate low through high speed and confirm 97113-J2000 airflow reaches the selected vents without abnormal vibration. Recheck 6201-056 before the lower trim is closed.
For item 6201-056, confirm that the 97113-J2000 centrifugal wheel clears its housing and that the 6201-056 connector lock engages without force. After seating 6201-056, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-056.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-J2000 |
| Cross-reference numbers | 97113-J2000 |
| Vehicle brand | KIA |
| Vehicle model | Soul |
| Model year | Confirm by OE reference |
| 97113-J2000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-056, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-056 record remains the picking reference.
For trade item 6201-056, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6201-056 on the packing instruction.
Frequently Asked Questions
How should item 6201-056 and blower number 97113-J2000 be verified?
Match 6201-056 to the complete 97113-J2000 marking, then compare the 6201-056 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-056 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-056; confirm steering position, climate-control specification and the original 6201-056 geometry before approval.
What circuit checks are useful when 6201-056 does not operate?
For 6201-056, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-056 motor again.
Which details should accompany a wholesale request for 6201-056?
Provide item 6201-056, OE 97113-J2000, the stated application, quantity and destination; add 6201-056 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-056?
Clear debris from the air inlet, check that the 6201-056 wheel turns freely, seat the 6201-056 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-056: Send 97113-J2000, the 6201-056 application and required quantity for a fitment and supply review.
