97113-B5000 Blower Motor for KIA K3
Primary OE reference: 97113-B5000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA K3
Brand: KIA
Model: K3
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-B5000 Automotive Blower Motor Overview
This listing links 97113-B5000 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6201-005, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6201-005 when comparing this 97113-B5000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-B5000. The recorded application is KIA K3. For 6201-005, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6201-005 with the approved OE reference.
HVAC Interface and 97113-B5000 installation
During work on 6201-005, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 97113-B5000 installation. Recheck 6201-005 before the lower trim is closed.
For item 6201-005, confirm that the 97113-B5000 centrifugal wheel clears its housing and that the 6201-005 connector lock engages without force. After seating 6201-005, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-005.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-B5000 |
| Cross-reference numbers | 97113-B5000 |
| Vehicle brand | KIA |
| Vehicle model | K3 |
| Model year | Confirm by OE reference |
| 97113-B5000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-005, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-005 record remains the picking reference.
For trade item 6201-005, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6201-005 on the packing instruction.
Frequently Asked Questions
How should item 6201-005 and blower number 97113-B5000 be verified?
Match 6201-005 to the complete 97113-B5000 marking, then compare the 6201-005 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-005 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-005; confirm steering position, climate-control specification and the original 6201-005 geometry before approval.
What circuit checks are useful when 6201-005 does not operate?
For 6201-005, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-005 motor again.
Which details should accompany a wholesale request for 6201-005?
Provide item 6201-005, OE 97113-B5000, the stated application, quantity and destination; add 6201-005 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-005?
Clear debris from the air inlet, check that the 6201-005 wheel turns freely, seat the 6201-005 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-005: Send 97113-B5000, the 6201-005 application and required quantity for a fitment and supply review.
