97113-A4000 Blower Motor for HYUNDAI Elantra
Primary OE reference: 97113-A4000
Cross-reference 1: 97113D7000
Cross-reference 2: 97113Q2000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI Elantra
Brand: HYUNDAI
Model: Elantra
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-A4000 Automotive Blower Motor Overview
This product entry documents the 97113-A4000 blower unit with practical identification and 97113-A4000 installation checkpoints.
For catalogue item 6202-014, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 97113-A4000 blower important at idle and in traffic. Use 6202-014 when comparing this 97113-A4000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-A4000. The recorded application is HYUNDAI Elantra. For 6202-014, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6202-014 with the approved OE reference.
HVAC Interface and 97113-A4000 installation
During work on 6202-014, After 97113-A4000 installation, operate low through high speed and confirm 97113-A4000 airflow reaches the selected vents without abnormal vibration. Recheck 6202-014 before the lower trim is closed.
For item 6202-014, confirm that the 97113-A4000 centrifugal wheel clears its housing and that the 6202-014 connector lock engages without force. After seating 6202-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-014.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-A4000 |
| Cross-reference numbers | 97113D7000 / 97113Q2000 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | Confirm by OE reference |
| 97113-A4000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-014, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6202-014 record remains the picking reference.
For trade item 6202-014, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6202-014 on the packing instruction.
Frequently Asked Questions
How should item 6202-014 and blower number 97113-A4000 be verified?
Match 6202-014 to the complete 97113-A4000 marking, then compare the 6202-014 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-014 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-014; confirm steering position, climate-control specification and the original 6202-014 geometry before approval.
What circuit checks are useful when 6202-014 does not operate?
For 6202-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-014 motor again.
Which details should accompany a wholesale request for 6202-014?
Provide item 6202-014, OE 97113-A4000, the stated application, quantity and destination; add 6202-014 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-014?
Clear debris from the air inlet, check that the 6202-014 wheel turns freely, seat the 6202-014 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-014: Send 97113-A4000, the 6202-014 application and required quantity for a fitment and supply review.
