97113-1U000 Blower Motor for HYUNDAI ix45
Primary OE reference: 97113-1U000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI ix45
Brand: HYUNDAI
Model: ix45
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
97113-1U000 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 97113-1U000 to support OE-number comparison before purchase.
For catalogue item 6202-004, Cabin 97113-1U000 airflow depends on the 97113-1U000 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6202-004 when comparing this 97113-1U000 airflow configuration.
OE Reference and Application
The primary catalogue number is 97113-1U000. The recorded application is HYUNDAI ix45. For 6202-004, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6202-004 with the approved OE reference.
HVAC Interface and 97113-1U000 installation
During work on 6202-004, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6202-004 before the lower trim is closed.
For item 6202-004, confirm that the 97113-1U000 centrifugal wheel clears its housing and that the 6202-004 connector lock engages without force. After seating 6202-004, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-004.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 97113-1U000 |
| Cross-reference numbers | 97113-1U000 |
| Vehicle brand | HYUNDAI |
| Vehicle model | ix45 |
| Model year | Confirm by OE reference |
| 97113-1U000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-004, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6202-004 record remains the picking reference.
For trade item 6202-004, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6202-004 on the packing instruction.
Frequently Asked Questions
How should item 6202-004 and blower number 97113-1U000 be verified?
Match 6202-004 to the complete 97113-1U000 marking, then compare the 6202-004 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-004 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-004; confirm steering position, climate-control specification and the original 6202-004 geometry before approval.
What circuit checks are useful when 6202-004 does not operate?
For 6202-004, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-004 motor again.
Which details should accompany a wholesale request for 6202-004?
Provide item 6202-004, OE 97113-1U000, the stated application, quantity and destination; add 6202-004 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-004?
Clear debris from the air inlet, check that the 6202-004 wheel turns freely, seat the 6202-004 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-004: Send 97113-1U000, the 6202-004 application and required quantity for a fitment and supply review.
